Icer Posted October 27, 2006 Share Posted October 27, 2006 Does anyone have any advice as to how to get the stock tube off? I have a new extended length tube, but I can't seem to get the stock one loose. Thanks! Quote Link to comment Share on other sites More sharing options...
M1014 Posted October 27, 2006 Share Posted October 27, 2006 strip the weapon as far as allowable,,,find a heatgun,,then apply heat to the base where the tube and reciever thread together,,I used low heat and some magic wan motions as get the whole area,,check every 5 minutes or so to see if it will come loose with padded pump pliers,,have an assistant so they can hold the gun or find a vise,,, Quote Link to comment Share on other sites More sharing options...
StarLynx Posted October 29, 2006 Share Posted October 29, 2006 ..What M1014 said..works great..I used a 1200 watt heat gun..when it reached 400+ degrees Farenhiet(Sp?)..{according to a Laser pointed Thermo}.it unscrew'd with one gloved hand...with great amazing ease...I wouldn't use any pliers/channellocks..etc...the stuff benelli uses to secure it in place..gets soft @ aprox 400 Degrees.. Stay Safer! Wade [ 10-28-2006, 09:28 PM: Message edited by: StarLynx ] Quote Link to comment Share on other sites More sharing options...
Icer Posted October 31, 2006 Author Share Posted October 31, 2006 Thanks for the advice, I will give that a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.