Sharkson Posted September 20, 2006 Share Posted September 20, 2006 I am going to use my buddy's shotgun for duck this weekend (my first crack at hunting - got my licence tonight) which he left with me for safe-keeping. After 12 years out of country, I think I'm entitled to a little compensation for the rent. I have no manual though, so... My first question is, how the heck do you plug this thing? In Ontario, we're allowed only 2 in the magazine, and it currently holds four. I have the thing stripped down. How do I get the magazine off the receiver? Is it threaded on? It won't budge. Is there a trick to get the shell follower to slide out? Once I get inside the magazine, I can plug it no trouble. Any help would be much appreciated. Quote Link to comment Share on other sites More sharing options...
Sharkson Posted September 20, 2006 Author Share Posted September 20, 2006 Nobody?? Quote Link to comment Share on other sites More sharing options...
Full Bore Posted September 20, 2006 Share Posted September 20, 2006 The original plug is nothing more than a rod shaped like a long nail which will go through the hole in the end of the forend retaining screw. You can make your own with a piece of soft steel rod and peen the end over or have one made by a machinist. The original was made from alum. You don't need to take the mag apart. You can find a schematic at www.gunpartscorp.com Hope this helps you. [ 09-20-2006, 12:49 PM: Message edited by: Full Bore ] Quote Link to comment Share on other sites More sharing options...
Sharkson Posted September 20, 2006 Author Share Posted September 20, 2006 Originally posted by Full Bore: The original plug is nothing more than a rod shaped like a long nail which will go through the hole in the end of the forend retaining screw. You can make your own with a piece of soft steel rod and peen the end over or have one made by a machinist. The original was made from alum. You don't need to take the mag apart. You can find a schematic at www.gunpartscorp.com Hope this helps you. Aha! That would explain why there is a hole in the end of the forend retaining screw! That makes the removal of the mag unnecessary; it's sure on there tight anyway. Thanks very much!! Quote Link to comment Share on other sites More sharing options...
M1014 Posted September 21, 2006 Share Posted September 21, 2006 Sharkson,,how about a pic or two of your 121??? Quote Link to comment Share on other sites More sharing options...
Sharkson Posted September 29, 2006 Author Share Posted September 29, 2006 Originally posted by M1014: Sharkson,,how about a pic or two of your 121??? Check this thread (I know you have already seen it) at the bottom of page 1. That is the exact shottie I have, just not a slug barrel. http://www.benelliusa.com/cgi-bin/ultimatebb.cgi/topic/1/3369.html? [ 09-29-2006, 03:26 PM: Message edited by: Sharkson ] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.