BoKnows308 10 Posted March 3, 2007 Share Posted March 3, 2007 Need some help. Just got in My new SBE2 yesterday and was trying to mount my Weaver 93 base on it. Barrel is drilled and tapped. When I went to remove the factory screws, there are no slots for a screwdriver. I scratched off the camo thinking I would find the screw slot under the camo. Nothing yet? Has anyone else had this problem? Bo Quote Link to post Share on other sites
tucker301 1 Posted March 3, 2007 Share Posted March 3, 2007 They are hard rubber plugs which can be pushed out from the inside using a small punch or similar instrument. Quote Link to post Share on other sites
beckhamd 10 Posted March 6, 2007 Share Posted March 6, 2007 I took mine to the Bass Pro Shop in Dallas. The gunsmith had to use a scribe and a small hammer to remove. Looking back on it I probabbly could have done it myself but why screw up the gun. Only cost me $10.00 dollars to have them do it and I was out in 15 minutes. Quote Link to post Share on other sites
protondecay123 10 Posted February 10, 2010 Share Posted February 10, 2010 They are hard rubber plugs which can be pushed out from the inside using a small punch or similar instrument. Thanks for the heads up! Quote Link to post Share on other sites
tucker301 1 Posted February 10, 2010 Share Posted February 10, 2010 No problem. I'm glad to see someone use the Search feature and actually find something useful here. Quote Link to post Share on other sites
billythehillbilly 10 Posted November 5, 2012 Share Posted November 5, 2012 what scope did you put on the sbe2 did it need rings ? did you remove rear sight on slug barrell? post a pict Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.