Newaza Posted March 21, 2007 Share Posted March 21, 2007 How many of you guys are using these followers in your Benellis? Are they a good product? I just sent of my M.O. to get the M4 full length tube from SOCOMguy, and I'm planning to install the Sure Cycle follower. I want to make sure I am not doing anything detrimental to the functioning of my gun. Thanks. Quote Link to comment Share on other sites More sharing options...
wingbone Posted March 22, 2007 Share Posted March 22, 2007 I've had no problems, you should have ordered an extra spring from them as well. they offer a s.s. spring Quote Link to comment Share on other sites More sharing options...
Newaza Posted March 22, 2007 Author Share Posted March 22, 2007 Is the SS spring longer/stronger than the factory spring? I hesitate switching out springs because I've had problems in the past doing this with other guns (even using reputedly top-of-the-line aftermarket springs). Quote Link to comment Share on other sites More sharing options...
wingbone Posted March 22, 2007 Share Posted March 22, 2007 Is the SS spring longer/stronger than the factory spring? I hesitate switching out springs because I've had problems in the past doing this with other guns (even using reputedly top-of-the-line aftermarket springs). you have to look at it this way, it is a matter of time before you can have problems with the factory spring from use, keeping it loaded etc. no matter what you will need a good back up spring to keep you in business and those sure cycle guys will take care of you. if you have had your shotty for a while remove your factory spring and wipe it down with some oil and just see how much rust comes off of it. Quote Link to comment Share on other sites More sharing options...
Super M4 Posted April 5, 2007 Share Posted April 5, 2007 I'm running a Sure cycle mag tube extension on mine with the provided red follower and longer spring. I had complications on feeding with the longer spring and could just barely fit the 7th round in the tube. I switched back to the factory spring and kept the new follower in and it runs and feeds flawlessly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.