joey Posted January 5, 2006 Share Posted January 5, 2006 I just got my sbe11 and it seems that the stock piece seems to slide up and down. Is this normal? Quote Link to comment Share on other sites More sharing options...
BLACK JACK Posted January 5, 2006 Share Posted January 5, 2006 What piece exactly are you referring to? Quote Link to comment Share on other sites More sharing options...
joey Posted January 5, 2006 Author Share Posted January 5, 2006 The piece your left hand would hold when shooting. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 5, 2006 Share Posted January 5, 2006 Is this your first gun? If the stock is loose, then pop off the recoil pad and tighten the nut. Quote Link to comment Share on other sites More sharing options...
BLACK JACK Posted January 5, 2006 Share Posted January 5, 2006 That’s the forend and no it should defiantly not slide up and down. If it is put together right then your barrel/top receiver should also be moving. Sounds like your forend cap is not tightened up all the way. Make sure that the plug and plug retainer do not come out past the end of the mag tube. Also make sure the top receiver is mated to the lower receiver correctly. Quote Link to comment Share on other sites More sharing options...
BLACK JACK Posted January 5, 2006 Share Posted January 5, 2006 Tucker I think he is referring to the forend. "The piece your left hand would hold when shooting." Assuming that he is shooting RH of course. [ 01-05-2006, 07:10 AM: Message edited by: BLACK JACK ] Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 5, 2006 Share Posted January 5, 2006 Oops! I'm a lefty Quote Link to comment Share on other sites More sharing options...
joey Posted January 5, 2006 Author Share Posted January 5, 2006 So on you sbe11 the forarm will not slide slighty up and down? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 5, 2006 Share Posted January 5, 2006 No, and it shouldn't on yours either. Quote Link to comment Share on other sites More sharing options...
joey Posted January 5, 2006 Author Share Posted January 5, 2006 What could cause this the forend cap is as tight as it will go? Does the forearm actually snap onto the barrel? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted January 5, 2006 Share Posted January 5, 2006 At this point, I have deep concerns over the way you are assembling the weapon. Either take it to the dealer and get his assistance or get some hands-on help from a friend who has some experience. Quote Link to comment Share on other sites More sharing options...
garren Posted April 6, 2006 Share Posted April 6, 2006 Maybe it isn't SBE at all. Are you sure you don't bought a Nova? Quote Link to comment Share on other sites More sharing options...
garren Posted April 6, 2006 Share Posted April 6, 2006 ah... old post. you probably already figured it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.