Jump to content

StarLynx

Members
  • Posts

    218
  • Joined

  • Last visited

Everything posted by StarLynx

  1. I've tried the Slugs & the 7.5....It will cycle both...but ya have ta put only two @ atime..because otherwise it will allow 2 of the shorties in to the loader & jam. It has cycle three correctly....but not consistantly.They say you can adjust it some way to make it work consistantly...but I haven't tried it yet. Surprisingly the slugs are loaded pretty hot..& made out of some pretty hard stuff.I shot one thru an old econoline van...It went thru the passenger side door..thru the console...& out hte other side..& hit a sand pile about 20 feet from the drivers side of the van like an artillary shell...
  2. Yup..Thanks ta M1014...I test positive for the Benelli I.V. virus now...& my Flight Doc says there is NO cure!!!..They even make me wear a condom at Skeet shoots..Quail/Dove hunts...Fugitive Ap roundups....(Too late for that ,tho..cuz my whole crew carries Benellis anyways,now....)....
  3. Benelli chokes can be ID'd by the notches while in the barrel..according to the manual..One Notch is full,2 -improved modi,3-Modified,4 Imp Cyl,5 -Skeet......They are usually marked on the outsise when removed ... Do what I did...I said I didn't get any of em..so they sent me five chokes.....6 if you include the 20 ga choke sent by mistake... If they've changed it any I'm sure one of the other Benelli nutts will chime in... [ 07-25-2006, 04:40 AM: Message edited by: StarLynx ]
  4. I own 2 M3s..A newer one & a H&K with a 26" field ribbed barrel ...But unless ya wann'a keep it in the pump mode..I'd be careful about adding too many accesories to it..Because remember it's an Inertia operating auto bolt....I was going to have the reciever drilled & tapped for a rail like one of my M4s so I could mount a Kobra 4 Chevron'd op site... but was advised against it because of that ..Both of mine have shot mags & cheap wally mart ammo without one Hiccup..& don't wann'a screw that up...Let us all know tho if it still works with all the kitchen sink stuff added, The M4s are gas operated...& thats why they work with everything including a blackhwk chopper glued to it....from the looks of some of the m4 owners that have posted pics of the extra gear... Stay Safer! [ 07-24-2006, 06:19 PM: Message edited by: StarLynx ]
  5. ****!...Wish they'd send me crewmates that look like that... [ 08-08-2006, 09:43 AM: Message edited by: Nelli Girl ]
  6. Eric..I'm not try'n ta steer ya fromBenellis...cuz I'm a M3 & M4 nut myself...But M3s/M4s are still kind'a up there on the price range...& thier recoil is comfy for me...& I kind'a tend ta stay away from the shoulde kickers.... But if ya like pumps....I shoot a Remy 870 PMax Police mag....& the Gel pads they use aren't bad...but I tried the Knoxx Shock absorber stocks & they really take the stomp out of mag loads.. A buddy of mine has a Super Nova with all the anti kick stuff on it...& I couldn't tell much diff..& I really couldn't tell any diff with heavy mag loads.. ...I tried a Knox Spec ops & a Copstock folder..& it was like nite & day difference... I got one of the Knoxx Door breacher Pistol grips on one of my Little Shorty PolMags ..& it compares to my 410....... Ya might try a Nova...but call me a *****(Female vagina)...but it still kind'a stomped a mudhole in my shoulder....If ya look around..you can find a few Novas used on Arfcom or some other forums for less than $400...One went for $275 on Arfcom the other day... ....Otherwise..spend the money & buy ya a M4..You won't regret it..& if ya don't like it...Theres plenty of people that will buy it back from ya..they're fast sellers....I'm not sellin' any of mine...I'm leave'n my body ta science..& both of em are be'n superglued to my chest... I'll add that the M3s are pump or automatics...So if ya like pumps..they shoot either way & no prob with lighter loads.....but still..kind'a pricey if your look'n at $400 max... [ 07-25-2006, 01:16 AM: Message edited by: StarLynx ]
  7. StarLynx

    doctor clone

    Not bad deal..I wish my Kobra 4 chevron'd had a base footprint that small...Are those as heavy duty as a Kobra
  8. StarLynx

    Bayonets

    I got a Threaded Sig with a very quiet Can for those silent options...
  9. If so...did they improve the slug performance/accuracy?? Thanks for any info Stay safer! [ 07-20-2006, 05:42 AM: Message edited by: StarLynx ]
  10. StarLynx

    M3 in Tx?

    There was three brand new ones in the box @ the last BigTown mesquite Gun Show...Asking price was $925 apeice....I forget the Gunshops name....I think it's located in Mesquite...There's a few on Gunbroker.com...priced kind'a high,tho... Also...Jim Walls that owns "Between the Walls Gun shop" in Midland texas has a brand new one... I own a H&K early model..& a newer one....Can't tell much diff between the two.....The Rifle site ones are usually cheepaer...I prefer the GHost Ring sites.....The newer ones have the LPA GR site like the M4..the H&K has a different style. with the high protective wings....LPAs are held on with 3 screws..the H&K are secured with 4 screws.. If ya call Jim in Midland....tellem that wade the Crazy chopper pilot sent ya..He might deal with ya on it.....Hurry up tho..cuz if I get a few more of my Saigas sold off..I'm buy'n it...Heh-heh! If ya buy one out'a state..you'll save the tax on it... Careful...don't get too close to guys like M1014...cuz he'll give ya a virus that makes ya wann'a own ALL BENELLIs.....I think I'm suffer'n the symptoms... [ 07-20-2006, 01:12 AM: Message edited by: StarLynx ]
  11. StarLynx

    Bayonets

    Hmm..I admit...that a Big Ol jagged edged Bayonet looks kind'a kewl ona M4 ....But...However...I usually do a lot a Run'n & move'n around with my M4...& my momma taught me to never run with sharp objects in my hands.. .& another is....If i have put myself in a situation where I gotta use a bayonet to fight my way out of it....I deserve to be shot ,asskicked...or otherwise...for having let myself be put in that position with not enough ammo to kill everything that compromises me or my own crew tactically...... .....If i ever get into that type a situation...(Call me a *****...) but screw it...I'm call 'n in a airStrike with cluster bombs..on my own position... [ 08-11-2006, 01:23 PM: Message edited by: Nelli Girl ]
  12. All the extended Brileys Extra full etc..with the knurled ends sure do seem to group outstandingly well in my Benellis..
  13. Yup..Firequest has it all...kind'a high priced,,,The last batch of Rubber buckshot i bought was almost half that price.. AR...I've shot all the low range stuff & it has yet to hic-cup one time with it,,,,,One of my M4s originally came out with the 4 port...,,But Benelli asked for it back..& changed outthe barrel to a 2 port....Still no probs as of yet...
  14. I 've used Wolf ammo that was EXtremely dirty,,,& some that was extremely clean...I surmise they use a different formula sometimes.. I've used it in converted Saiga 12 sgs that was so bad it left heavy residues in the gas port & piston areas... I've shot it in my M4 & M3s..with no significant residual....maybe due to the different design in gas systems.I beleive the M4s are designed to be a bit more self cleaning. I still clean the **** out of em ,tho..after each shooting...
  15. StarLynx

    Choke Tubes

    All my Benelli chokes are marked.."NO Steel"..or "Steel OK"......Altho it makes sense not to use steel shot in a restrictive barrel/choke..
  16. Anybody out there got any 12ga Rubber Buckshot ammo they wann'a part with??.. [email protected] [ 07-17-2006, 12:49 AM: Message edited by: StarLynx ]
  17. Ammo..I got mine thru a LE Benelli Dealer....Took about 2.5 weeks...ran me about $319 total...with 5/Five benelli Chokes.. I contacted Benelli CS first...& the person I was talking to about chokes for my M4..(Which I got in less than a week..)..Anyways I ask'd about a 26" Ribbed field barrel for my H&K M3...& she said there was at least 6 or 7 go'n to the distributors...So I had my guy put in an order for one....Turned it into a real clay buster,too!..Can't wait ta try it out on some West Texas Dove & Blue Quail... [ 07-15-2006, 12:37 AM: Message edited by: StarLynx ]
  18. StarLynx

    Bayonets

    YUP!..Nice pics...I wouldn't be surprised if 1014 don't have one!!!!...
  19. Aww...well...You can pick up the M4s anywhere from about $1200 to about $1800 USDs.....I bought my First M4 thru a LE distrib for around $1199....this last one I bought was a LE 11707..Including Both Pistol grip stocks( Sliding)& Both mag tubes.. 6 chokes $1775 by the time I got it shipped NIB...Can't say about the M1s or any other models except the M3..I own two of the M3s H&K model & new one..Got about $750 to $1100+ tied up in them..Got short & long field barrels for em Stay Safer!!
  20. Wow!..I'd have thoght you guys would at least get some kind'a Tarif break... Stay Safer!
  21. Out of curiosity,Char...How much Dong/denero does it take in "ThighLand" to own a M4??
  22. Kewl!!..Can ya get one in the TITTEE Grip" style..,,or that says "Harley Davidson".....Heh-heh!!. I bet my Big Handed ex would even luv that one!!...
  23. ****!!!..I'd sell one of mine for that!!!
  24. The Benelli PG stock I bought off of THR is a shorty 13"..Fits Body armour great..& anyways I prefer the shorter stock fit.. I've got a speed feed PG stock that I originally had for a Mossy that comes with all the adaptors for different brands..Mossy,Remy ithaca..etc...not sure if they make an adptor to make it fit a Benelli...I don't like the PG finish as much as the rubber grip on the Benelli I've got a Standard PG Benelli Stock for an M4 I'll never probably use..
  25. You can find em on the gunforums...The Firing Line,THR,AR15.com...etc...I bought one for my M3 which is hte same..for about $80 shipped... I've got one thats for a M4 if anybody is interested....Never used it..came with my 11707...will never need it or use it...whats it worth??? Stay Safer!
×
×
  • Create New...