Ding Chavez

Print a copy of the weather report for that day to verify your claim of rain. And take it to the judge. Let them decide after pleading your case. You may be surprised! At the least, it will be reduced--hopefully! Just a thought. Good luck!

Ahh, A Stones fan....

Hello, Does anyone know if it is possible to mount an M4 scope rail on an M1S90? If so, where can I find one? Thanks in advance!

Very nice!

"A $1400 shotgun should have zero recoil!" Who makes it? I'm in!

Might want to consider another gun for hunting needs. The bbl price is shocking! Maybe an 870 for hunting and leave the M1 as is? I have an M1 and went through the same route. Bought a 26" and stock for clay games and hunting. Should've bought another used M1 for the same coin. IMO. Good luck!

Shoot it--unless the M121's are drawing big bucks. Looks like a nice one...

WHOA! That's a bad break for sure. Thanks for the info. I am curious as to Benelli's response. Are they going to replace it?

Anyone use the 21" M1 Super 90? I have a 26" and am considering adding a 21" for close in hunting. Is there really any difference?

Don't forget that with an auto you only have to clean one bbl!

Hello, Has anyone had a problem with too much weight on an inertia recoil system? I am curious as I am trying to adapt an M1 for clay games and have weighted it in the stock and mag tube. Running 1 oz loads it has been 100%. But am considering adding the mag tube cap weight. Will this be to much? Thanks....Dinger

Give the mercury recoil reducer a try. I added one to my M1 that I use for skeet. All the O/U guys laugh at me for using an auto but my shoulder doesn't hurt after 100rds anymore. Good luck!

Thanks for the replys! I agree--to just pick up a shorter bbl. But price is an issue. I was just curious if anyone had any success shortening and rethreading for choke tubes. Looking at the Vent Rib may be a problem. I have a 26"VR and am looking at something around 21". Not even thinking about anything shorter than 18.5".

Has anyone had a M1 S90 barrel shortened? I have a 26" that I would like to shorten to 21". Any suggestions?

Do you have a close up pic of your scope mount? Thanks!

Thanks again! Is the Benelli OEM mount made by DA-MAR?

Thanks for the info. Do you have a part # or description? The Brownell's listing has many parts but I am not seeing the mount. On-line lists the Da-Mar mount. Any suggestions? Thanks!

Does anyone know if the mount on the M1014 will fit the M1? If so, are they available? Thanks!

Very nice! What make is the choke/comp???