Ding126

Heres a tube: http://gunbroker.com/Auction/ViewItem.asp?Item=86397606 another tube http://gunbroker.com/Auction/ViewItem.asp?Item=86568955 Here's a m4 w/ coll stock http://gunbroker.com/Auction/ViewItem.asp?Item=86483545 Keep checking..the coll.stocks show up from time to time.

I would suggest buying the next collapsible stock you find on GB.com..they are becoming far and few lately. I would recommend the one piece mag tube from socomguy on this forum..they are nice an fit well. If you have to have the factory 2 rnd tube..I'll sell you mine for 250.00 The stock m4 holds 5 rnds despite what the literature says 5+1 is plenty for me.. Chances are slim if you think your gonna lose your gun for not complying to 922r...I think you would have a better chance of being struck by lightning IMO Yes I understand better safe than sorry..but the chances are that someone is going to know all the laws and importation laws are very slim to none. Buying these parts on GB..or where ever has to be cheaper than a flight to europe or where ever. Good Luck on your search. Don't stress all these parts pop up from time to time....be patient

Did anyone buy this??

I believe you need the 4 rnd extension. They are out there, but are difficult to find at times. Be patient,you will find one. Try Gunbroker.com and search Benelli..I see them from time to time

For all my benelli brothrs & sisters looking for a collapsible stock. I came across this today. http://gunbroker.com/Auction/ViewItem.asp?Item=85899985 No its not mine, but these are getting harder to find and just wanted to pass it along. Mike

I understand the cutting and sizing of barrel & tube. Who did the barrel ring & sight welds or brazzing? I am so tempted. I have several rifles I need to SBR,,even if I don't do the work. Just to register them and get the 922r out of mind. Did you have the gun engraved with your info? or how do you get around doing that?

Thanks M and ditto !!

D, Who did the work on the georgous M4. and what did it cost you? Ding

I dont actually know, but I'm guessing around 6-700 for the pistol and 800-1k for the rifle. I'm still researching brands and prices. " Yankee Hill seems to be a good buy so far, but I'm leaning towards the surefire stuff..........But then again...I could buy another pistol for the price of a supressor...decisions, decisions...

If it makes anyone feel better. I stopped by two shops in northern calif. and they were priced at 1595.00 w/ pistol grip. OUCH !

I did a search yesterday on Gunbroker and some on Ebay. I couldn't find a single M4 collapsible stock, where three weeks ago GB had about 4 on there. Are they drying up.? I would recommend buying an M4..it will last a lifetime and you will have the collapsible stock that was made for the rifle. I would buy a stock if you come across one no telling when you might find another. I saw an M4 on a Glock website at a reasonable price 1700.00 w/ skelton stock and 1300.00 w/ pistol grip. I've been tempted to sell mine, but think I better keep it for now. Good luck, Mike

I have one of his tubes. They ( it ) looks nice. One day I will take the time to install it. I have the 2 rnd factory extension at the moment,,so I guess thats why I haven't swapped it out yet......****, I haven't even shot mine yet. I have 4 rifles I purchased in the last two months and haven't shot one of them. Been stocking up on ammo and accessories, waiting for the day. LOL

Sorry, my mistake its http://surecycle.com/default.asp?page_id=1&parent_id=0 I want a supressor for a rifle & pistol and had Surefire on the brain. I purchased the aluminum anodized red follower from a member on the forum. I see a kit for about 28.00 on the site above.

my feelings are like this. As much as I try to comply with federal & state laws regarding firearms. I think some of us may be a bit paranoid to comply. I have NEVER heard of or read anything to say that Mr. X weapons were confiscated because he did not comply with 922r. I am pretty sure that 99% of law enforcement and ATF for that matter aren't up to speed. They have too many other things to worry about. I have NEVER been shooting in the field or at the range and asked to see my paperwork for my registered weapon when I lived in Kalifornia. I just think most of us want to comply but are being a bit paranoid. If you use your weapon in the act of commiting a crime, then chances are your will have your weapon examined for federal compliance and unless it's a Full Auto or SBR I don't think most local law enforcements are up to speed on importation laws. Or maybe I just live on the edge..LOL I have an SAR-8 ( removed thumbhole stock & added flash hider ) an HK911 removed thumbhole stock and a Benelli M4 with skeleton stock, 2 rnd extended mag. If you noticed none of the parts to the trigger assembly have made in Italy (m4 ) nor does the mag tube follower. How would anyone know where they came from. And the mag tube I purchased on this forum doesn't have made in USA on it, nor does the surefire mag follower. Heck I might as well take my trigger a part and have the machine shop engrave made in USA on all my parts..who's to say they aren't or can prove it?? Just shoot your guns..obey the basic laws and we will all do just fine.

No-F Thanks, I couldn't understand why it won't feed & cycle manually. I'll just have to take her out. Thanks again, I feel better.

****guy, Thats awsome, glad you had a great experience. I have yet to shoot mine. I am looking forward to it. Mike

I have a new, unfired M4. I loaded the mag tube and tried to manually cycle out the rounds. The first round will not chamber unless I push the red button..a shell is released onto the carrier and slides into the chamber. Now i pull the bolt back and the shell is extracted, but the next shell sits in the tube. I 've never had a Benelli cycle like this before ( old school ) Hk M190 and M3 prior Yes I have read the manual. Question, is this normal? and will the rifle cycle automatically when actually being fired?

I think........ since its an M4 L.E. model. The skel stock does collaps. Why wouldn't it?

Why does all of benelli literature shows 4+1 ****guy, Load the mag tube, put one in the chamber, then hit the red button on the side of the receiver. I think it will kick a shell onto the carrier. Then load the tube again.

As a recreational rifle for targets and possibility of using the rifle for hunting ( buying the longer barrel ) the M3 would be the best choice. If for a self defense weapon I would recommend the M4. In the moment of shock, stress and being pumped up. the M3 can become confussing and create miss loading during the pump or confussion between semi auto & pump. When split seconds count, you may not have the time. There for I would recommend the M4. Think of what the intent of the weapon is for. Choosing a Benelli is your first step, now pick a model that will suit its intended purpose. Mike

price reduced to 2150.00..buyer to pay shipping if not in AZ *** SPF ***

answer YES. If you modify it to hold more than what it came with then it violates some kind of regulation. 922r There is plenty of posts on this forum.

I have a new in Box M4 LE model. with both the pistol grip & collapsible stock ( functional ) factory 2 rnd ext mag tube. (No Flag on Receiver ) and 5 boxes of slug and 5 boxes of 00 buck $ 2200.00 ftf in Az. ( Chandler Area ) ( No trades ) Email: [email protected]

Welcome and congrats on your new M4. I just picked mine up last night and completely broke it down and changed out the stock. How many chokes did your M4 come with? My was purchased out of state and only received one choke ( installed ) I was under the impression the rifle came with more???

What cokes actually come withe the M4? I seem to be missing one or two. Anyone know? Mike