cody6.0
-
Posts
586 -
Joined
-
Last visited
Posts posted by cody6.0
-
-
Pick yourself up some Federal TruBall slugs, I use them out a M2T and M4 with a modified choke with very good results.
-
kmc0929, if you need a grip I have a new one in an open brownwells bag that I'd part with for $12 shipped.
-
Anyone who can order the M4 c-stock and +2 can order the SNT c-stock.
-
I'm not quite sure what you're asking do you need to remove the rubber insert or the entire stock?
-
There's a ton on gunbroker right now.
Hmm.
Given people that pay the high prices are just as much to blame I really hope those that bought these up didn't do so with $$$ on the mind.
-
Thanks guy's for the help. Who's Ext tube do you like the best ?
Aside from the fact that I always choose Benelli over anything else if it's available I would still say Benelli. They fit the best and look like the rest of the gun. People make fun of my OE fetish but how many times do you see me posting about failures or issues?
If I had a Benelli extension left I would cut you a **** of a deal but the last one I had was messed up.
-
Which brand do you suggest? Do you think powder coating is the way to go or just some good rattle can.
Powder coating is just going to give you the look as you won't be able to do the threads or inside of the tube. If you must use a black one I would leave it alone or have it plated like the OE parts.
-
Thats a pretty good price if you can actually get it for that much. Even after paying for a transfer and shipping you should still be ahead on the deal.
-
I have had a few of the black ones but have seen only one H2O extension for sale in the last couple years.
-
Please elaborate as to where you are getting this info. I have called and spoken with Benelli, Numerich, and a few others and have been told LE/Military sales only. Not only that, but you have to have some sort of department documentation as well to order. I see them on the "black market" for sure but you make it seem like they are just pouring in.
I don't care who told you what both items are being shipped and sold as we speak. It doesn't take super investigative skills to see this either so give your rants a rest.
-
Ok guys I know that people are playing the Botach lottery but I have no intentions of doing the same. If you have a new and recent production 70085 in a factory sealed box please PM me.
I want one and will by no means make you a millionare but I will make it worth your time if you are willing to cut to the chase.
Cody
-
some here make it out to be way to complicated on why the price drop. there are an abundant amount of them out there for sale now. thats it, and all the people sitting on a bunch of them want their investment to turn back to $$ and not inventory!!
and as for the "Urbino", Um its not a collapsible!!
Exactly, People just don't seem to understand that these like the full tubes and +2's are still imported and sold on a daily basis.
-
So now the question is how long would it take to get one from them 5, 6 maybe 7 weeks?
-
yeah push back! like trying to stop a tank with your bare hands.
It could be as opening a door and the people who ***** the most still wouldn't do anything but more of the same.
-
I hate to say it but good for Arizona when it comes to there new immigration laws! I am sick of hearing constitution this constitution that but people seem to forget it only applies to US citizens. As for any gun laws that may try to sneak in I think thats kinda reading things a little past the point.
With that being said if people really worry this much then go tell someone who can do something and don't ***** on a internet forum. I don't have anything against the OP or people who replied but come on folks let your "voice" be heard. The reason laws and the govt in general keep getting worse is because no one pushes back.
-
I am the opposite. A 2-piece part where a 1-piece part could accomplish the same thing is just another problem waiting to happen. A mild-steel tube that can be much more easily dented than a titanium alloy tube could be used at the same/less cost, is also a poor decision.
For that matter, I bought an OEM Benelli 7-shot steel tube for $100 a while back. It functioned and matched the finish just fine, but it was not as well made as the Ti tube I now have from Kip, nor was it nearly as dent/corrosion resistant.
We are now hearing stories about 4140 tubes made by Socomguy that are having some rust issues at the reciever. I am sure the OEM Benelli mild steel tube is not any better.
I would go Ti alloy, 1 piece.
When it takes a hammer to even dent the tube if you render your M4 usless in the field because of this you deserve it. The same goes for rust issues as if you neglect it don't expect flawless function or durability.
-
Not only are they cheesy...........they look downright
. 
Thats funny because thats exactly what I think about seamless full tubes. And I'm the kinda guy that gets a panel repainted if I get a rock chip on my cars. I like the broken up lines that the +2 provides versus the full tube. But if I had to run a full length tube I would splurge and spend $190 on a Benelli made one.
-
Send Benelli an e-mail. Do what they say. If TSHTF and it blows up, I think that you will have grounds to get settlement. I doubt it will take your head off.
I wasn't worried about an overpressure disaster I just wanted a clear answer as 5.56 does not equal .223 and it should be advertised as such. The accuracy difference was more so my concern as the leade differences have a large effect when shooting the wings off flies at 100yds.
-
The Benelli +2 is by no means junk and threads on as good as you can with square threads. After you freshing it up if new the color match is spot on also.
I like it because it's a Benelli product and I actually like the break up of lines provides vesus a full length tube. It does how ever make for a tight fit when removing or installing the barrel. But even then if you aren't in a hurry it isn't a big deal.
-
Thanks for all the input guys as this is one thing I just never really looked to far into until now.
5.56 vs .223 has been a debate for qute some time and even when answers are provided I still can't belive how many questions are still out there. Most people will tell you the leade is different because of cartridge size yet it's all about pressure.
Some top notch AR's will have leade dimensions available but I could find nothing about the MR1/RX4 anywhere. I usually go by what the barrel says yet companies saying 5.56 is "ok" kind of sets a double standard.
-
Even after having a few of this I never gave this any thought. I keep seeing the MR1 listed as a 5.56/.223 but the barrel is marked rem .223 only.
So is it fair to assume that the barrel leade/throat is .223 and not 5.56?
-
does that work on the collapsible stock?
€: oh comon, its for a rifle! read the thread more carefully!
I was wondering when someone was going to catch that.
-
+1, a Briley speed wrench and some choke-tube grease and I NEVER have this problem.
Although no wrench will fit the breacher style tactical chokes you can still wrench em down by hand and they won't come out. Ihad the same choke on my M4 for an entire day (100-150rds) and it was still tight as **** when I took it off that night.
-
Suggestions for what?
You most likely won't find it for less than that..............if they can even get it.
It isn't like the stocks for these guns are hard to com by as Benelli has them ready to ship be it a Rislan M4 stock or a PG for a Supernova.
School me on Supernova Collapsible Stocks
in Benelli
Posted
When any dealer who does Benelli LE/MIL contracts can order them they are readily available. KB Fab can pretend to be funny but then he would have to explain where M4 C-stocks & +2's come from as it's the same place. In short the same places that bend Benellis LE/MIL rules now can get the SNT C-stock with the same ease.
Given one ******* thinks he's cracking some good ones the jokes on him.