Jump to content

JustBC

Members
 View Profile  See their activity

  • Posts

    39

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by JustBC

    Installing a Limbsaver 10403 on a Benelli M4 Collapsible Stock

    in Benelli

    Posted

    On 2/7/2024 at 5:10 PM, StrangerDanger said:

    The Airtech is nicer. It will work on the fixed stocks or if the end user was willing to give up the fully collapsed position since you can’t drill into it and expect it to provide the same recoil mitigation. 
     

    But yeah, they do need an adapter plate like the Noveske one the last I recall. 

    I installed the Airtech. It really does tame down the recoil.

    • Like 1

    M4 feeding

    in Benelli

    Posted

    I have read a number of threads about the M4 being difficult to feed. After reading these threads, I am inclined to try polishing the carrier latch being careful not to change the geometry.

    Before I do this, I wanted to verify something.... I installed a Taran Tactical lifter shortly after I bought the M4. (I got my thumb bitten by the cutout on the stock lifter.) 

    So here are the questions: What is the purpose of the cutout on the stock lifter?

    Does eliminating the cutout add enough interference to make loading more difficult? If so, is it worth the tradeoff?

    Thanks.

    Now that Robar isn't doing coating, where to go???

    in Benelli

    Posted

    I procrastinated on getting my M4 coated and missed the proverbial boat. Robar did a Sig 226 in Roguard/NP3  for me that is perfect. I want to get the outside parts of my M4 coated. I care about the receiver, barrel and magazine tube. I do not need NP3 on the parts (although it would be a nice to have) @StrangerDanger is there an outfit you would recommend to do some sort of coating similar to Roguard or Black Teflon? I am worried about having someone doing Cerakote as the tolerances are tight. Robar knew how to do a Benelli. who else can we trust?

    Roguard?

    in Benelli

    Posted

    Thanks everyone!

    @strangerdanger, I am thinking about getting the externals done with Roguard, not NP3. I don't fancy a shiny shotgun, at least I didn't until I saw yours. That is a sweet piece of work! :-)

    I am not that worried about corrosion. The main reason behind doing this is I have the FFT extended mag tube and the color doesn't match as well as I would like. I was thinking about having the internals coated with NP3 though. Your description pushed me over the edge, NP3 it is! I was going to leave the pistons be, I thought they were stainless. Are they worth plating as well?

    Thanks again.

    BC

    Roguard?

    in Benelli

    Posted

    Has anyone sent their M4 to Robar for their Roguard/NP3 treatment? If so how did it come out? Any problems? Was it worth it?

    Thanks!

    Shotgun light

    in Benelli

    Posted

    It took awhile but I finally got around to purchasing the IWC mount. It works just fine with my InForce WML.I attached a couple pictures. Fit and finish are great, it is nicely machined. I really liker having a QD sling now. It makes takedown much less annoying.The only negative feedback I have is the color doesn't quite match the barrel. IMG_0187.jpg . I guess I need to send everything off for the Roguard/NP3 treatment at Robar. Does this cycle ever end? ;-)

    IMG_0186.jpg

×
×
  • Create New...