RxArms
-
Posts
356 -
Joined
-
Last visited
-
Days Won
90
Posts posted by RxArms
-
-
1 hour ago, Gilgamesh said:
Thanks for letting me know, the place that quoted me didn’t mention that haha. For the price they quoted it didn’t make sense to do it anyways though.
Not only do you have to think about the sights but also the front barrel ring. Both of these items are made for the thickness of the barrel at the front. Not the middle.
-
1 hour ago, Gilgamesh said:
I could just do that with my current 18”. I’d spend less just selling the current benelli I have at a loss and buying the entry model.
Cutting an 18 to a 14 is not a great way to go. The design of the barrel is such the OD increases at the end where the sights are, if you cut it down the OD will not be nearly as thick at the new end.
-
Dragging this thread up from the abyss.
i bought another boxed 70085 pistol grip and buttstock assembly for the M4. The comb has Philips screws on it! I’ve never seen this, this is a brand new assembly.
question is, is Benelli now using Phillips screws alongside Allen hex screw? Anyone else recently have a new buttstock with Philips screws on it?
-
Hey All,
I'm developing quite a few products this year, and one of them is a half moon rear sight to give a much more open sight picture when cowitness with an integral mount. (which I am also developing for the RMR and T2 footprints).
I just wanted to get some general feedback on the idea, and an idea for the demand on such a product.
If you are interested, you can join the waitlist here, which will give me a good tally on demand.
-
I have some under production, will be taking a portion of the mag extensions and doing titanium cerekote. But I’m 2 months out.
-
1
-
-
Mods please ban this spammer!
-
I offer a cheek riser comb spacer if you are interested In mounting your optic on the picatinny, and if you want to keep your current setup. You can find it at rxarms.com
-
Not sure of the value but to answer your question, anything made before 2020 Is better than new imo.
-
Thanks for the votes, it helps greatly with product surface finish planning.
-
Are you just wanting the option of the picatinny?
-
I’m glad you like it! Let me know how the install goes.
-Robb
-
1
-
-
Unfortunately I can’t change the poll now, but that would have been a good idea!
-
1
-
-
Looking for some data points on how many people own Black vs H2O Benelli M4. would love your input if you can! Will help me guage which finishes to put on future products.
-
1
-
-
2 hours ago, brightt said:
keeping tabs on this, may have to get on eventually just for the option, any potential np3 or similar finish to match an np3 h20 11711 m4?
If you have a pre 2020 Benelli m4, then a titanium cerekote SHOULD be okay. Anything after 2020 Benelli new buttstock have slightly tighter tolerances, and I do not think cerekote will work.
but be prepared for cerekote to cause too much surface buildup to make the tube unusable.
to answer your question I will not be offering this item in NP3.
-
1
-
-
I have mentioned this in the instructions on my website, but wanted to make a note here. The Rx 6 position tube should be installed leaving around 1.5 threads exposed in the reciever. In my experience this is how OEM looks before it is removed. And my tube is designed for this.
-
4
-
-
46 minutes ago, RPC said:
All due respect, but why all of a sudden are several folks trying to source the OEM false msg extension?
I was thinking the same thing!
-
These arrived today, and are in stock.
I changed it to 5mm intervals for more fine tuning.
5mm, 10mm, 15mm, 20mm and 25mm.
Thanks!
-
I think another cool gift idea would be a custom cerekote job on his M4 depending on where he served in the military, you could design it after that.
heres an example
-
I’ll have my 6 position recoil tube in stock next week if that is what you’re looking for!
you can check it out at rxarms.com
-
So I have been doing more digging into the ATF Form 6 exemptions. I have previously thought I understood the terms.
I've been under the understanding that a form 6 exemption is granted for Benelli M4 accessories and parts that are $100 and less, under point 4, sub section 3 which reads:
- “Minor components and parts for Category I(a) and I(b) firearms except barrels, cylinders, receivers (frames) or complete breech mechanisms, when the total value does not exceed $100 wholesale in any single transaction.”
Under Category I(a) and I(b) firearms it states the following:
- a. Nonautomatic and semiautomatic firearms, to caliber .50 inclusive, combat shotguns, and shotguns with barrels less than 18 inches in length, and all components and parts for such firearms.
I have always assumed that the Benelli M4 was considered a combat shotgun, however, with further digging I have learned that the ATF classification for the Benelli M4 is a "Sporting Shotgun" as it is imported into the USA with the standard stock and magazine limiter installed. So every Benelli M4 that is imported into USA and sold to civilians is a "sporting shotgun" and not a "Combat Shotgun".
This lead me to read further down the Form 6 Exemptions list, point 6 which reads:
- Sporting shotgun parts other than firearm frames or receivers or barrels. [are exempt from Form 6]
__________
So, what I take away from this is that all parts and accessories that are imported into the USA (from Canada for example) for the Benelli M4, which is a sporting shotgun, are exempt from filing a Form 6, regardless of the dollar value for the purchase (of the parts or accessories).
Is there any reason to think that this line of thought is incorrect?
-
1
-
2
-
Hard to believe it’s been 8 months since I dove into this. Learned a lot along the way, and I truly believe the steps I’ve taken on this tube makes it the best on the market.
Finally, the tubes are on the truck back to me, completed and ready to go. Hopefully next week I’ll have them in hand and start shipping out to back orders before listing them as “in stock”
I’ll be testing each tube to confirm fitment on my M4s before packing them to ship out so I have a long few weeks ahead of me
-
6
-
1
-
-
11 hours ago, sonyman74 said:
Well, I love my SRO on this Mesa Tactical side saddle mount. It is not on a QD but If it fails I can still use my factory sites.
How high does your rear peep need to be to cowitness? What yardage?
-
Curious if there would be demand for a replacement plate that has the hole in it? I could probably sell them fairly cheap too.
from what I understand the issue is getting the right limbsaver model in stock?
-
1
-
-
On 11/3/2022 at 5:36 PM, Miles267 said:
Just picked up the new 11732 with same Benelli OEM multi rail as shown above. Has anyone with this model mounted any picatinny rail sections to it? Would like to mount a weapon light. The new multi rail doesn’t appear to be MLOK or keymod.
It uses proprietary Benelli attachments as far as I am aware.
WTB Benelli M4 14” barrel
in Benelli
Posted
Interesting I thought it would be more complicated due to the taper that is present. Might be a good option for OP then with the right gunsmith of course.