xblax619
-
Posts
128 -
Joined
-
Last visited
-
Days Won
5
Posts posted by xblax619
-
-
dibs if deal falls thru
-
for a discreet case i have gone to a lockable guitar case i found on ebay. less than $69 iirc.
-
1
-
1
-
-
On 8/15/2021 at 7:29 PM, Khoa said:
I went with the Scalarworks Leap mount with the Trijicon SRO. I can still use factory sight if the red dot fails and I liked how much faster I can find the red dot on the SRO. This setup is very forgiving on the cheek as well.
are the oem iron sights usable with that scalarworks mount in place? or would they have to be removed first? thanks.
-
looks like a cdm gear light mount. i have one of the newer versions. it was gonna go on the m4 since it would need tools to remove it i put it on a mossberg instead.
-
On 7/31/2021 at 10:13 AM, Arkrilok said:
Hello, are you folks still in business and stocking these mounts from time to time? I see the website is still up but the store has been under maintenance for a while. Glad to wait for restock if that’s the status just don’t want to keep stalking your page if you stopped making them.
I too have been stocking their page waiting for these to come back in stock. However, the page I’m seeing isn’t under construction. It says to be patient as they are still in the process of making more.
-
maybe look at troy muzzle brakes.
medievil
or the claymore
-
On 6/5/2021 at 5:58 PM, Evolution said:
Yep. IMO, nothing beats OEM guards stippled by Tango Arms.
^This.
-
1
-
-
i dont think it’s necessary to put my ammo in a safe, so i use a job box, like this:
-
9 hours ago, sonyman74 said:
A new batch ofThe SRO Tools have arrived. 31 tools remaining as of now. $25 shipped with tracking.
How do I purchase this? Do u expect to make more after this batch is sold out?
-
11 hours ago, Pack Rat said:
The Noveske might work. Don’t over tighten it though
This is another consideration.
saw this on another forum. personally im not really sure i like the placement of the cup on the stock. worried about roll over when connected.
-
7 hours ago, sonyman74 said:
Where can I get that at?
i got mine from freedom fighter tactical.
-
I’m interested in this as well I purchased the noveske sling plate pictured below and discovered that it won’t work with my urbino stock as is. I’m considering opening the center hole to accommodate the recoil tube but haven’t gotten around to it.
-
i believe the 1014 is fixed and not threaded.
-
6 hours ago, Kags1969 said:
I've always had pretty good luck with them, but I know lots of other folks who have had problems. Good Luck.
^ same.
-
1 hour ago, Wreckless said:
There is always the Turkish clone option for $120.
can u verify (or have u) that it will fit an M4?
-
21 hours ago, rubicon20032003 said:
Anyone ever install one?.Took nut off in stock .But can’t seem to get anything else apart .To get these in
ya i picked up one a short while ago to install on my mesa urbino stock but discovered that it currently won’t work as is. because of the shortened length if the urbino that center hole on the qd plate would need to be opened up to accommodate the diameter of the stock tube where on an oem benelli stock it would sit just behind. right now its sitting in a box while i decide what to do.
-
On 1/15/2021 at 6:30 PM, Birdog19 said:
Oh no! Look what arrived via UPS this evening. Do I start drinking before or after the attempted swap-out? It's hard to tell from the photo, but it is a Noveski.
on the optics planet sight these look silver in color. https://www.opticsplanet.com/noveske-benelli-qd-sling-plates.html?_gl=1*rhsvi4*_ga*YW1wLTRXdzI5SFBBaU9aNk9XR2h3TVlRZThxM1ZuUlVldy10TU5BTVBXSVZTMkZSSG9BZ1NYQ0xlYmFtbFpfeHdNa0w. is yours black, or is it just the lighting in the picture. if i can get it in black i will get it on backorder right now.
-
9 hours ago, M2_shootr said:
I think it’s just the angle of the camera.
An SRO will cowitness the sights near the bottom of the viewing area
Awesome. Good to know.
-
On 5/13/2020 at 4:57 PM, StrangerDanger said:
This thread needs pics. A client sent his SRO on a Scalarworks Mount today for his 11721. It sits a little higher than the RMR, so its more forgiving in the middle position of the collapsible stock. Here’s some pictures.
in that last pic, is view of the rear ghost ring sight obstructed/blocked by the mount or bottom of the sro itself.
-
On 7/5/2020 at 3:59 PM, RickRope said:
Cut down to 12.625” to 12.750” depending on where you measure it. Complete with limb saver pad
$190 shipped
is this still available?
-
quote “it puts the red dot a hair above the front site and I mean a hair. pretty much perfect.”
could u possibly post a pic of your sight picture? the scalarworks website puts the trijicon rmr dot within/in-line with the stock ghost ring sights.
-
if you’re still looking for one, i have a mesa tactical 6-round side saddle I would be willing to part with. btw I’m in San Diego.
-
it does. after placing an order for mine, I found one in the marketplace in another forum im a member in and bought that. after getting the spring and follower on ebay im basically in for what i would’ve paid carrier comp without the wait. so i canceled my order.
-
Howdy. just got my first m4. couldn’t help myself and picked up a few upgrades while it was in 10-day hold (I’m in California). haven’t got around to firing, been busy.
upgrades purchased:
mesa tactical urbino stock
mesa tactics urbino stock pocket push button sling adapter
carrier comp 7-rd tube
wolff spring
ndz performance aluminum follower, orange
Freedom Fighter Tactical charging handle, 3/4”
GG&G Tactical bolt release pad
other upgrades interested in:
Trijicon RMR and Scalarworks mount
light and mount
Blue force gear sling setup on both ends with QD sling swivel
in Benelli
Posted
what is that qd attachment in the stock? is the the noveske one? if yes, how did u get it to work with the urbino?