Nikolai552 Posted April 4, 2009 Share Posted April 4, 2009 I took the plastic plugs out and didn't keep them, and now i am looking for either more of those, or some screw in ones. Any ideas where to get them? -Took them off my SNTAC Quote Link to comment Share on other sites More sharing options...
agm65ccip Posted April 4, 2009 Share Posted April 4, 2009 what you could do is go down to a hardware store and find whats called a set screw that is the same (diameter/TPI etc) as what you use to mount the scope/rail and if you can get one short enough you should be all good for about $.30 out the door. Quote Link to comment Share on other sites More sharing options...
OldFlick Posted April 4, 2009 Share Posted April 4, 2009 (edited) Brownells or a local gunsmith. Get plug screws, they tighten by having a slight head. A set screw will not tighten and might work down and hit bolt. The only place I have seen the plastic plug is on SBE's. Edited April 4, 2009 by OldFlick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.