wgfolker Posted July 4, 2009 Share Posted July 4, 2009 Actually, it was the last message that I had written 4 times before it would take it. This is the 3rd post. But I think I got my answer anyway. Quote Link to comment Share on other sites More sharing options...
wgfolker Posted July 5, 2009 Share Posted July 5, 2009 From what I have learned it will fit since other makers will also fit. I'll post a picture in the next reply. Quote Link to comment Share on other sites More sharing options...
wgfolker Posted July 5, 2009 Share Posted July 5, 2009 Here is a picture of what I want to mount. Quote Link to comment Share on other sites More sharing options...
Andyb Posted July 6, 2009 Share Posted July 6, 2009 ^ I like that. Quote Link to comment Share on other sites More sharing options...
Duggan Posted July 6, 2009 Share Posted July 6, 2009 Here is a picture of what I want to mount. It might work ... depends on the barrel profile (the magtubes should be the same), and the difference in the distance between the barrel and the magtube on the two guns ... worst case scenario, some screws won't be perfectly snug I would guess, unless the barrel profiles are WAYYY different. That said, a weapon mounted that far forward will affect the balance of the gun, and unless you use a remote tapeswitch, you are basically limiting yourself to on/off, which is bad ... but that is a different discussion entirely. Quote Link to comment Share on other sites More sharing options...
tlingitndn Posted August 8, 2009 Share Posted August 8, 2009 Quote Link to comment Share on other sites More sharing options...
Duggan Posted August 8, 2009 Share Posted August 8, 2009 I see what you did there. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 9, 2009 Share Posted August 9, 2009 I am mounting a nice, very brite and small Nitecore Infinity Defender using a simple mount I found on Ebay with a 25mm x 18mm ring. The mount is two half pices held together by six small allen screws. It fits between the barrel and mag tube, clamping to the mag tube. If you are interested and need more info, just let me know. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted October 3, 2009 Share Posted October 3, 2009 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.