HogBoss Posted May 14, 2009 Posted May 14, 2009 I'd like to put a Picatinny mount on my SBEII. I found the B-Square 16330 for the SBE, but I'm not sure if it works with the SBEII. I'd like to mount my eotech on my shotgun --anybody ever done that? Thanks! Quote
tucker301 Posted May 14, 2009 Posted May 14, 2009 Get it drilled and tapped. 93 Weaver pattern. EGW makes it the rail. Quote
agm65ccip Posted May 14, 2009 Posted May 14, 2009 Get it drilled and tapped. 93 Weaver pattern. EGW makes it the rail. I thought we decided that the little nubbies on the side instead of the full cross bar were not the way to go for reliably mounting optics... I know there was a whole other thread that ended with cleefurd making a new rail. So if that new rail anywhere close to fitting on an SBEII I'd hold out for that, especially if you are drilling and tapping because then you can make the holes to fit the rail rather than the other way. Quote
tucker301 Posted May 14, 2009 Posted May 14, 2009 We decided? EGW makes a good product. The problem with the M4 rails posted in the other pic wasn't so much the way the lugs are made as it was the fact that the rails aren't milled to true 1913 specs. That allows for an ill fit. between the rails and the rings. Cleefurd can do whatever he wants to do. If I were mounting optics on my SBEII, I'd either use the EGW or simply buy a dencent quality blank (like the Millett PC00003) and drill it to match the 93 Weaver pattern (just stay in sync with factory Benellis). Quote
agm65ccip Posted May 14, 2009 Posted May 14, 2009 We decided? Yeah I say a lot of funny things, I wasnt attempting to be a dork about it, sorry. I was just meaning to say that it sounded like not having the full cross bar could cause some issues and that there were other options. Quote
Unobtanium Posted May 14, 2009 Posted May 14, 2009 We decided? EGW makes a good product. The problem with the M4 rails posted in the other pic wasn't so much the way the lugs are made as it was the fact that the rails aren't milled to true 1913 specs. That allows for an ill fit. between the rails and the rings. Cleefurd can do whatever he wants to do. If I were mounting optics on my SBEII, I'd either use the EGW or simply buy a dencent quality blank (like the Millett PC00003) and drill it to match the 93 Weaver pattern (just stay in sync with factory Benellis). The rail is 1913 spec except for the axial cut which destroys the "foot" of QD mounts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.