mark29860 Posted September 20, 2009 Share Posted September 20, 2009 I found a sight called easy hit shotgun sight on another post and would like to know if anyone has one and if you have to remove the factory bead or can you install it behind the factory bead. Thanks Quote Link to comment Share on other sites More sharing options...
hognutz Posted September 20, 2009 Share Posted September 20, 2009 You can install it behind the factory bead. Be sure you wipe the rib down with acetone as directed, or you may have trouble keeping it on. Quote Link to comment Share on other sites More sharing options...
Trapshooter1 Posted September 21, 2009 Share Posted September 21, 2009 I found a sight called easy hit shotgun sight on another post and would like to know if anyone has one and if you have to remove the factory bead or can you install it behind the factory bead. Thanks On my Super Nova I just placed it right behind the bead. It didn't look right but it was no big deal. On my next gun (M2) I took the sight off by taking a cleaning patch and placing it over the sight, and using an adjustable crescent wrench tightened down, unscrewed it. Then I wiped the section of rib down with the included cleaning patch and let it dry a couple minutes. Then I very lightly set it on the rib. Then I made slight adjustments to its position by pushing it to line it up. Then I pressed down firmly and it was ready. Quote Link to comment Share on other sites More sharing options...
hognutz Posted September 21, 2009 Share Posted September 21, 2009 The main reason why I would, and did, mount one behind the original sight is in case you would lose the glue on Easy Hit. Glue on means, not for ever, in my experience. If you are out hunting and would lose it, you would at least have the original. If you butt it up tight to the original, it really is not that bad. Just a suggestion.. Quote Link to comment Share on other sites More sharing options...
Trapshooter1 Posted September 22, 2009 Share Posted September 22, 2009 I just used it for eye dominance issues, If I lost both beads it wouldn't be a big deal, I doubt it will come off if you clean it and press down on it. It could happen though. Quote Link to comment Share on other sites More sharing options...
(TANK) Posted September 24, 2009 Share Posted September 24, 2009 I've always wondered what the gun looks like under the glue when it comes off or one get tired of it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.