datto71 Posted December 15, 2009 Posted December 15, 2009 (edited) New to the board, I appreciate any help I can get. I just bought the Benelli extend +2 tube part # 81043p for the Benelli M4 and I was wondering exactly how I install it? I don't need any additional springs do I? Thanks:) Edited December 15, 2009 by datto71 Quote
cody6.0 Posted December 15, 2009 Posted December 15, 2009 Just remove the barrel like you were doing a full cleaning then with the barrel removed unscrew the bum extension. You will then see a ring holding the mag spring in which you will need a snap ring pliers to remove. Just be careful when removing this because the spring will want to shoot out. With that out of the way screw on the new extension tube and reinstall the spring and ring. Quote
M4JOHN Posted December 15, 2009 Posted December 15, 2009 Hello, Im new to this forum, Currently Living in the PRK, not sure why anymore.... anyway.... I am the proud owner of two M4's non LE version. One of which was purchased in LasVegas and came with the extenssion tube installed, though I believe it is aftermaket. Im wondering if there is a difference in the law concerning the addition of the extention and simply replacing the etire tube for one like Socomguy sells? Is the addition of the extention tube considered "modifying and or producing" as it applies to replacement of the tube, and would I then have to replace other non imported items on the weapon to bring it to complience... I have searched this for a while, probably too long in that now Im swimming in complicated details up to my arm pits. thank you in advance ! Quote
datto71 Posted December 15, 2009 Author Posted December 15, 2009 Thanks Cody I thought I needed to take out the clamp and spring but I was not positive. I just finished putting on the extended tube and loaded seven, Thanks for your help. Quote
wintetra Posted December 22, 2009 Posted December 22, 2009 does anyone know a good extension tube for an sbe 2? and do they do any damage to the camo paint finish or not? Quote
cody6.0 Posted December 22, 2009 Posted December 22, 2009 Actually Benelli makes extensions in Camo and black either will work. Quote
agm65ccip Posted December 22, 2009 Posted December 22, 2009 does anyone know a good extension tube for an sbe 2? and do they do any damage to the camo paint finish or not? I got my +2 extension here: http://www.tjgeneralstore.com/magazine_extensions.htm Worked out really well, but its only a black tube, but that worked well with my black M2...I can't imagine that you would hurt the camo though. Quote
wintetra Posted December 23, 2009 Posted December 23, 2009 do u know were i can find the benelli extension tubes? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.