bwarner Posted October 13, 2005 Posted October 13, 2005 The manual states that the bolt handle can be pulled off with a firm tug. Tried several times,Am I doing something wrong?? Won't come off for me. [ 10-12-2005, 08:52 PM: Message edited by: bwarner ] Quote
heavy4x4 Posted October 13, 2005 Posted October 13, 2005 It's easiest to pull off when the bolt is in the forward position. Pull hard. If you can't get it, I hear yanking on a shoe-string wrapped around it helps! Quote
Commando Posted October 13, 2005 Posted October 13, 2005 :)You can remove the entire assembly without taking the charging handle off to a point. What I did was take bolt out of shotgun and used a tool that I use for my AR15 which is just a push out tool that does not mark up area. You can use something similar and push out from the opposite side of the charging handle. After you do this then pulling the handle off at first is much easier. Quote
drakekillr Posted October 13, 2005 Posted October 13, 2005 What I do is use a small loop of string, twist it a couple of times and pull. It comes right out. Keep the string in your breakdown case. A shoe string or small braided cord will work. It won't leave a mark. Quote
drakekillr Posted October 13, 2005 Posted October 13, 2005 Sorry, guess I didn't read all of heavy's reply the first go round. Quote
tucker301 Posted October 13, 2005 Posted October 13, 2005 I've found it easiest to remove once the bolt assembly has been removed from the receiver. It comes out with a firm tug with finger and thumb. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.