Quakc2u Posted February 11, 2012 Share Posted February 11, 2012 Have learned to hold my sight low and to the right. Always wondered why I was missing birds. Patterned my gun at 12 yards and 25 yards. It definitley shoots high and to the left. Sometimes even if you adjust the fore arm nut, It will change the pattern area and I,m not the only one having this problem my friend bought a Stoeger 2000 and it shoots high and to the left. He installed a burris scope and adjusted it to shoot down the sighting barrel. I believe that Stoeger has a problem in the manf. area. And should look into this. Before you buy one it is an area to be mindful off. Quote Link to comment Share on other sites More sharing options...
duckht183 Posted February 11, 2012 Share Posted February 11, 2012 I hear the M2000 also has some cycling issues. But then again, you're gonna get what you pay for.. Quote Link to comment Share on other sites More sharing options...
Feather Buster Posted February 22, 2012 Share Posted February 22, 2012 my stoeger shoots very straight,one of the staightest shooting shotguns i own,hate to hear that it seems to be "hit or miss"with the lower priced guns.they should find a better quality control procedure. Quote Link to comment Share on other sites More sharing options...
duckht183 Posted February 22, 2012 Share Posted February 22, 2012 Stoeger shotguns are made in Turkey, correct? Enough said... Quote Link to comment Share on other sites More sharing options...
Novaking Posted February 23, 2012 Share Posted February 23, 2012 Stoeger shotguns are made in Turkey, correct? Enough said... I could be wrong but isn't all Benelli barrels manufacturer in Turkey? Quote Link to comment Share on other sites More sharing options...
duckht183 Posted February 23, 2012 Share Posted February 23, 2012 Benelli does have a barrel manufacturing plant in Turkey.. my issue with Stoeger isn't in the barrel though, its because I've heard way to many cases where the shotguns are jamming. Quote Link to comment Share on other sites More sharing options...
DU4ME2 Posted February 26, 2012 Share Posted February 26, 2012 My M2000 shoots just fine....No problems............My SBEII shot high and to the left..Adjusted the shims and it's dead center.....I also took the back bead off and put on a high-viz sight...Big difference......... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.