EdWalton Posted March 29, 2014 Posted March 29, 2014 I just bought a Super Vinci for turkey-hunting I'd like to mount a picatinny rail so I can mount a reddot-scope on it. It appears to be drilled & tapped, but the filler caps are not slotted. Is it drilled & tapped, if so how do I remove the caps with out marking the finish, then what rail do I order to matchup the gun & scope? Thank You Ed Quote
M2_shootr Posted March 29, 2014 Posted March 29, 2014 Ed, The receiver is drilled and tapped. Those plugs need to be driven from the inside out. Strip your receiver, tap them out with a drift, I believe I used a 5/32" drift. OpticsPlanet carries an EWG receiver rail for Benelli semi-autos. There are others available, you will just have to search to find one that suits your needs/budget. Quote
WrenchBender Posted March 29, 2014 Posted March 29, 2014 (edited) I was told that any Benelli rail may fit. With that given information, you may be able to use a Benelli rail from a M2. Saw those listed on Brownells. Edited March 29, 2014 by WrenchBender Quote
EdWalton Posted March 30, 2014 Author Posted March 30, 2014 I've order the rail for the M2 from Brownells. Thank You Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.