Jump to content

shim question


Recommended Posts

OK here is a question for someone(i hope).I have a benelli super sport and took the stock off for cleaning.There is a nut ,lock washer and a plate with letters on it.My question is which way does the plate go back in(no i didn't pay attention taking it out) for a factory type setting?I hadn't realized that it could go several different ways.(I do now) Any help would be appreciated.



Link to comment
Share on other sites

It needs to be paired up with the drop/cast shims between the stock and the receiver. Take the stock off and any drop/cast shims should be identified with letters. From the Benelli Super Sport Manual:


Matching instructions: the drop change

kits are identified by letters. To ensure a

correct drop always match locking plates

and shims that have the same letters, e.g.

C - CDX - DX or C - CSX - SX.

DX = Right hand

SX = Left hand


If you have the manual, there's a complete explanation including charts on how to pair up the shims and locking plates. If you don't have the manual, you can download it off Benelli's website.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...