Latch Carrier part help

[J1valverde]

Hello. I recently acquired a M1 and was wondering if I could order just the bolt release pin or if I would have to order the complete carrier latch?

 

For reference I’m talking about this piece: https://www.brownells.com/shotgun-parts/trigger-group-parts/carrier-parts/carrier-latches/carrier-latch-prod6253.aspx

 

just trying to see if I can get just the bolt.

[truckcop]

It's unclear what part you're asking about. The part you linked to is the carrier latch. There's a pin that holds the carrier latch in the receiver that you can order. https://www.gunpartscorp.com/products/740510G

If, by chance, you're talking about the "button" that protrudes through the receiver that you press on, no, you can't order that separately. That piece is press-fit into the latch body. If you're talking about something else, you need to clarify.

[J1valverde]

That’s exactly right. I was talking about the bolt release button. I’ve already order the complete latch carrier part. Thanks

[Steve Rose]

The bolt release “button” is an add on part. You will need to drill and tap the stud on your factory part to accept the screw for the button (buttons available from Nordic, Briley, Taran Tactical, Arrendondo, etc). The tapped size will vary based on the brand (generally 4-40, 5-50, or 6-32.

 

 

A hint...DO NOT drill all the way through the factory part. The stud can break loose easily. A blind tapped hole about .250” is best

 

Edited August 12, 2018 by Steve Rose

[Steve Rose]

Here is another idea. This device acts as a bolt release lever with no modification to the factory Latch Carrier https://www.brownells.com/shotgun-parts/bolt-parts/bolt-hardware/benelli-rapid-bolt-release-tabs-prod61488.aspx