JosERW Posted January 15, 2019 Posted January 15, 2019 I am trying to remove the extractor from the bolt head on my SBE3 but I can't for the life of me get the pin out. I don't want to hammer it too hard. I can't find any videos online. What am I doing wrong? Does it only come out from one direction? The part looks like a standard roll pin. Thanks. Quote
Steve Rose Posted January 17, 2019 Posted January 17, 2019 Quote The pin only comes out from one direction. You drive out the pin by inserting a flat tip punch into the hole opening that only allows you to see a portion on the pin's diameter-in other words your punch will contact about ½ of the edge of the pin's end 1 Quote
Derrick Posted January 31, 2019 Posted January 31, 2019 On 1/17/2019 at 10:03 AM, Steve Rose said: The pin only comes out from one direction. You drive out the pin by inserting a flat tip punch into the hole opening that only allows you to see a portion on the pin's diameter-in other words your punch will contact about ½ of the edge of the pin's end That sounds tricky. I was helping a buddy installing the brake kit and xd wheels on his truck when he mentioned he's having hard time removing the extractor. We'll check it out this weekend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.