seawolf357 Posted December 7, 2006 Share Posted December 7, 2006 What recommendations do any of you have to clean and lub a SBE II with max4 camo finish? I have read some barrel cleaners will take the finish right off. Normally I use Hoppes 9 with Remminton gun oil. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted December 7, 2006 Share Posted December 7, 2006 Clean all camo'd parts with a damp cloth and wipe dry. Clean and lube internals and non-camo'd parts with Breakfree CLP or Hoppes Elite. Throw Rem-oil in the trash or give it to someone you don't like. Quote Link to comment Share on other sites More sharing options...
DeadlyBenelli Posted December 9, 2006 Share Posted December 9, 2006 Tucker. Does CLP ever evaporate off? Or will it stay on and continue to lube even on hot fall days? Quote Link to comment Share on other sites More sharing options...
tucker301 Posted December 9, 2006 Share Posted December 9, 2006 I'm not aware of it evaporating off. Military uses it in the sandbox, so it should be fine for hot Fall days here. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted December 9, 2006 Share Posted December 9, 2006 BREAK-FREE CLP TECHNICAL DATA (Test Data on File) *Meets or exceeds MIL-L-63460 specifications. *Operating temperature range: -53.9 C (-65 F) to +246 C (+475 F). *Firing residue removal: 98%. *Noncorrosive -- pH neutral. *Nonconductor -- dielectric constant 2.18. *Pour Point: Below -59.4 C (-75 F) (ASTM D97). *Flash Point T.C.C. (Tagliabue Close Cup). Before Application: above 65.5 C (150 F). After Application: above 210 C (410 F). *Liquid does not support combustion. (ASTM--D1266 lamp method combustion). *Specific gravity: Approximately 1.0 gm/ml. *Weight: Approximately 1.0 kg/liter (8.3 lbs/gal). *Salt spray resistance: (5%) 100 hours plus. *Humidity cabinet test: 900 hours plus (Fed. Std. 791). *Falex wear life: 20 minutes minimum at 250 lbs. *Falex Load carrying capacity: 750 lbs (minimum). (MIL-L-63460) *Wear preventive characteristics (four ball wear scar): .8mm (ASTM-D2266) *Viscosity @ -53.9 C (-65 F): Approximately 3700 centistokes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.