Trigger assembly stuck

[Newhamphirehunter27]

Hey guys,

So let my take the SBE3 hunting he tried being a nice guy and cleaning it for me. He ended up getting the trigger assembly stuck. I’m not quite sure how to get it out. Any advice would help! Here a couple pictures.

Edited February 21, 2021 by Newhamphirehunter27
Add photo

[Nocturnalnature]

Press and hold the bolt release latch in, tilt the trigger guard down, and slid it out the back.

Once you get it out remove the bolt before trying to reinstall the trigger guard.

Make sure you depress the bolt release and hold it when reinstalling the trigger. Also, make sure the hammer is cocked before replacing  the bolt.

Edited February 22, 2021 by Nocturnalnature

[BigAl413]

How did you get it fixed? Mine is doing the exact same thing. I can’t press the bolt release button, it’s stuck too

[BigAl413]

How did you get it fixed? Mine is doing the exact same thing. I can’t press the bolt release button, it’s stuck too

[ChronicMixTapes]

Same issue. Bolt release is stuck. 

[Jonaslack]

Had this happen to me and got super frustrated trying to break it all free but if you look closely the button release is what is getting caught and won’t let the bolt forward take a small pick and remove the pin to take apart the bolt release button the will allow the bolt to slide freely off and the trigger guard will come out hope this helps anyone who has the issue in the future!