Rico89 Posted February 22 Posted February 22 Hello, I bought a brand new extractor for a Benelli M2. I noticed that when I look at it carefully from the front, the edge that grips the cartridge case has a cut on the left. Is it made that way on purpose or is it defective? Quote
Steve Rose Posted February 24 Posted February 24 (edited) Does your extractor look like this one? Edited February 24 by Steve Rose Quote
Rico89 Posted February 24 Author Posted February 24 (edited) 17 hours ago, Steve Rose said: Does your extractor look like this one? Yes, but the corner of the edge that grips the cartridge (the back corner in your photo, the bottom corner when the extractor is on the bolt) is rounded. I attached photos that I point it with red color. Edited February 24 by Rico89 Quote
remarkable Posted February 25 Posted February 25 Currently servicing 22 Benelli's, M2's M1 Super 90 SBE 1 - 3's they are all cut this way. Thus normal extractor cut. 1 Quote
Rico89 Posted February 25 Author Posted February 25 5 hours ago, remarkable said: Currently servicing 22 Benelli's, M2's M1 Super 90 SBE 1 - 3's they are all cut this way. Thus normal extractor cut. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.