larricky Posted November 3, 2004 Share Posted November 3, 2004 Leaving all legal questions aside for the moment, how does the M4 LE 11707 pistol grip stock remove? Based on the schematic on p.18 in spare parts manual, I've removed the recoil pad & stock retaining nut (which was super tight on every turn). Next in line is the stock retaining piece, which appears to be threaded itself. The question is do I just rotate the whole stock while someone else holds the receiver (with unloaded gun, of course)? I've put a good bit of torque on it already & it doesn't budge. Quote Link to comment Share on other sites More sharing options...
wallhanger54 Posted November 4, 2004 Share Posted November 4, 2004 Oh no you didnt do that did you? oh well...you didnt need to do any of that. Just remove the trigger assembly and unscrew the stock, reciol pad and all. Simple. Then screw the PG for the tele stock on and install the butt section of the telestock. Quote Link to comment Share on other sites More sharing options...
M1014 Posted November 4, 2004 Share Posted November 4, 2004 [ 04-22-2006, 06:59 AM: Message edited by: M1014 ] Quote Link to comment Share on other sites More sharing options...
kaiheitai17 Posted April 19, 2006 Share Posted April 19, 2006 YIKES!!! Am I glad I found this site and THIS post! Just got an 11707 and was just about to REMOVE THE RECOIL PAD, etc, etc, etc.... Thanks for asking the question and thanks for the answer guys!! Quote Link to comment Share on other sites More sharing options...
Red Cobra Posted April 19, 2006 Share Posted April 19, 2006 This is the greatest tactical Benelli site out there. Quote Link to comment Share on other sites More sharing options...
Duggan Posted April 19, 2006 Share Posted April 19, 2006 Haha! Everyone thinks they have to remove the recoil pad and that suspicious looking nut their first time handling the gun ... So don't feel bad. Luckily, it's a lot easier. The pistol grip should screw right on, then for the buttstock piece, tilt it to the left and hold the button in up to the third line. It should then tilt over to the right, and will move up and down from there to the 3 possible positions. Quote Link to comment Share on other sites More sharing options...
kaiheitai17 Posted April 19, 2006 Share Posted April 19, 2006 Thanks again, the manual just does not cover any of this. The additional info is greatly appreciated! Semper Gumby! Quote Link to comment Share on other sites More sharing options...
ishmael Posted April 19, 2006 Share Posted April 19, 2006 Boy, I was about to do the same thing! Quote Link to comment Share on other sites More sharing options...
kaiheitai17 Posted April 22, 2006 Share Posted April 22, 2006 Originally posted by ishmael: Boy, I was about to do the same thing! Well, now having read this post, I have successfully swapped out my pistol grip stock and have installed the collapsible one in its place. This thing now looks the shiznitz! All I gotta do now is get it out to the range... Thanks again for your help and advice! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.