Jump to content

surecycle +2 for M4 ?


ccwinmemphis

Recommended Posts

I don't have one, I went with a full length tube. Those that do have them have posted they are fine operationally. Many just don't care for the larger attachment collar. It can interfere with accessory mountings such as rails,lights and lazers. You can find those posts if you do a search.

Link to comment
Share on other sites

I have the surecycle on mine. The full mag extension is nice...VERY nice, according to all (especially the ones from SOCOMguy) but I didn't want to fool with the heating up the part etc of putting it on. The following thread has some discussion of the surecylce compared to Jakjakman's factory extension and it's relation to the sidearmor attachment.

 

http://www.benelliusa.com/forum/showthread.php?t=7988&highlight=afpj

 

Below is my surecycle with some measurements to compare with (my original post lost the link)

http://i57.photobucket.com/albums/g225/afpj1/m4/DSCF0599.jpg

http://i57.photobucket.com/albums/g225/afpj1/m4/09062227.jpg

Link to comment
Share on other sites

Has anyone here tested the Surecycle +2 extension for the M4 ? I'm considering buying one and wondered whether there were any problems with this system.

 

Thanks

 

 

I would wait and think about it man!!...I had the surecycle ext. and they function fine, the problem is that you have to take the extension off to remove the barrel, if you do not want to pay the money for the benelli factory ext. I would look into the Nodak Spud +2 extensions for the M4 and that is just my 2 cents :D

Link to comment
Share on other sites

The M4 is a gas assist gun (ARGO System) meaning it will use gas to assist cycling especially lighter loads and enhance reliability.

I would certainly think it is more reliable than an M1 with lite loads.

My M4 cycles any load very well. Not one hickup yet.

I agree with Wingbone. The Nodak Spud extension is a much nicer and trimmer option in my eyes. Its also the closest to a factory ext.

 

http://www.nodakspud.com./

Link to comment
Share on other sites

Wingbone,

 

I never tried a factory extension...the surecycle extension has to removed for takedown. Are you impying that the factory extension and Nodak's can be left on for takedown? I just went for absolute price since I am a tightwad (wife calls it something else) and only care about function, not looks. Yes the surecycle ain't pertty.

Link to comment
Share on other sites

Wingbone,

 

I never tried a factory extension...the surecycle extension has to removed for takedown. Are you impying that the factory extension and Nodak's can be left on for takedown? I just went for absolute price since I am a tightwad (wife calls it something else) and only care about function, not looks. Yes the surecycle ain't pertty.

 

the factory and Nodak Spud extension do not have to be removed to take off the barrel, and last I heard the spud guy changed his finish to closer match the finish on your Benelli....but I still think for the money you are gonna spend on the extension no matter what you buy it would be best to drop the a little more money and purchase the full length tube from socom guy, he does a really good job.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...