Leaderboard

I asked that same question from Benelli and eventually got a response from Italy. Just take the screw out and remove the red insert. Then place the silver oval in place. You can use a drop of glue to bond it. I used a tiny bit of gorilla glue on the underside of the medallion and a drop on the serrations on the insert post. Tap on the medallion with a rubber mallet. I used a gunsmith hard rubber mallet (you can by that for cheap on Amazon). Be careful because once you drive that medallion in you cannot remove it. I had to pound on the medallion pretty hard to get the sides to be reasonably flush with the wood. Don't use anything harder than hard rubber or you will marr the wood. Don't start the installation until you have the proper type of mallet. It worked pretty well and looks good. I found an engraver in Denver that beautifully hand engraved my initials in the medallion with some scroll border work. He did an awesome job and his charge for the work was reasonable. If you want more details about that and a photo PM me and let me know.