c rum

sent you an email

WTS Benelli M1 Pistolgrip Stock, excellent condition, Includes sling plate, buttpad and round metal shim. $95.00 shipped contact me at jeff at c-rums dot com

And the carrier

Both will fit however the buttstock will not match up to the receiver and would have to be notched for the trigger housing. The forearm fits fine without and mods

Yes is can be reversed

WTS LNIB Carlsons extended choke tube Light Modified .710 ID Fits Benelli Crio-Plus barrels.

Yes it applies to both the forearm and buttstock. Just to confuse you more technically they fit but will not mate to the receiver correctly. The M2 receiver is narrower than the M1 so the stock are not interchangeable from the M1 to M2 or vise versus. I hope that helps

They are not interchangeable as the M2 receiver is slimmed down compared to the M2 The stocks will not mate up to the M1 receiver right

+ 4 will be the closest to being flush

Email sent

That bbl does not appear to be an M1 bbl probably fits a Monte

To my knowledge the ones available are the DMW and the factory safety with triangle paddles on each side. Good luck.

Interested in buying your BBL Sent you a PM

It appears to be a Nordic button. The Nordic button is made out of aluminum.

Here are the dim's for the Nordic brand tubes you can also get them from the link below. 12 Gauge +02 +03 +04 +05 +06 +07 +08 Benelli M1, M2 6.19" 8.67" 10.44" 12.02" 14.39" 17.63" 20.28" http://shop.nordiccomp.com/NC-Shotgun-Extension-Tubes-for-12ga-12GA-EXT.htm I have had and used DMW tubes I prefer the Nordic Tubes. Use a bbl clamp too. Good Luck