wintwu

Any update from surefire on the release?

I had a stock problem to on the non-collapsable stock. The retaining pin broke i guess from recoil etc.

Just wondering if you install a full length aftermarket guide tube and later have to send the M4 into warranty service; will the warranty be voided? thanks

I remember there was some post that doesn't exist anymore or doesn't have pictures. what's the best way to check if your barrel is a 4 port or 2 port? thanks,

I would buy one set depending on price

After about 100 rounds it still happens when i bull the bolt back manually. during the 100 rounds it hung up during shooting 1 time. does replacing the recoil spring in the stock help? it seems like the boalt carrier doesnt' have enough force and gets caught up on the breech bolt latch (#019J).

what's SNT?

Thanks M1014, i was more curious than anything. also on my sometimes it gets stuck even when the bolt release tab is not activated (red dot showing)

Hey guys, has anyone tried these: http://www.surecycle.com I'm still breaking in my m4, havent had any problems yet but notice when i bull the bolt back manually sometimes it gets stuck at the rear. I know some people have mentioned replacing the spring in the stock. just wondering if anyone has any experience or insight to this. Thanks

I noticed this for the M1: http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=6504&title=RECOIL+REDUCER%2c+MERCURY%2c+11OZ has anyone tried these; does the m4 have one already built in?

on the m4's how do you tell what date it was manufactured?

Are there any advantages or dis advantages of having and older pre94 LE reciever?

I'm assuming there's now way of doing this in CALI?

I spoke to Customer Service. they said i should clean the heavy grease and break in with 100 rounds. They said that when the m4 is fully loaded with one in the chamber the bolt carrier shoudln't get stuck open when you rack it back. Anyone else have this issue?

Just talked to customer service. they said in 2007 they only supply one modified choke. you have to buy additional ones sperately. does anyone else make them for the M4 like Briley, or are all benelli chokes the same etc?

I just got my M4 and it only came with one choke. It's Modified choke with 3 slit marks, but the website says it's supposed to come with a Cylinder choke?

I just got my new M4 assembled it and was cycling some rounds. I noticed when the shell release lever (part #076J) is down showing the red circle, when I pull the bolt head open all the way back it just hangs there like it's stuck. I have to push on the bolt handle forward to get it to close again. Is this normal? or is there something that needs lubing or breaking in so it doesn't hang up like this? thanks.

does any other place sell the stock for cheaper?

How many lbs do you retork the screws at?

BTW in the video on the M4 on Benelli's website they show a side saddle. who makes that one?

I'm waiting for the Mesa rail system to come out so in the mean time i'd like to get a nylon/plastic side saddle that doesn't require changing the rail mount. Is Tac-Star the only one? Thanks.

I would be interested in one of these as well. when do you think they will be available?