PCFIVEZ

yea, that's what i threw onto my KSG. that sling works like a charm too! [ATTACH]2865[/ATTACH]

here's my setup...it's a Magpul MS4. yea, i know it's reversed, but it works pretty well. [ATTACH]2862[/ATTACH]

favorite shotgun forum: forums.benelliusa.com

got an email today and made my order...i know a few of you guys are looking for this to throw into your M4. so here you go. shipping is free also http://geissele.com/benelli-m4-super-90-hammer.html

i haven't tested mine yet...but besides looking awesome, what do these things really do if they don't choke?

IIRC i fit 8 (2-3/4 shells) in my SNT...and i'm using a factory +2 extension. zero problems.

maybe we should start stamping "made in usa" or "usa" on stock parts to pass. like people would ever know where it was really made.

i see i see said the blind man. thank you.

OK, i just bought an M4 and it has not arrived to my FFL yet...i believe the thing is made by Benelli USA... my question is, if it's made by Benelli USA...why do people still have to swap out parts for aftermarket US parts to make it 922 compliant? isn't the damn thing already composed of US made parts? ...or are they all Italian parts and just assembled here in the US?

that top rail is diesel. who made it?

so i'm guessing an ideal price for these things now would be from the 1500-1600 range? for anybody interested in looking for one, KYGUNCO still has an H2O (11718) still for sale a little above $1800 with free shipping.

that's the same c-stock on the benelli supernova. [ATTACH]2838[/ATTACH]

just scored an 11707 for $1577 from KYgunco.

OK scratch all that...somebody NOT on this board actually showed me the light. My BIG mistake was trying to attach the whole thing together as one piece instead of screwing the barrel nut on first! now without ever cutting the spring that came with my extension (almost did), I can now fit 7 in the mag and one in the hole. Somebody should STICKY this just in case somebody ever runs into this problem in the future. I mean...there aren't ANY kind of instructionals ANYWHERE on the internet regarding the installation of a FACTORY BENELLI +2 TUBE EXTENSION...NOWHERE!!! NOT EVEN YOUTUBE!!! the instructions below will help a few handfuls of people out in this world! "DO NOT cut the spring. If you are having problems then you pinched the spring in the nut or you have a restrictor in your tube. Take it apart again. Make sure there is no shell restrictor/limiter. Put the tube nut on first. Put the spring down the tube. Drop the cap in the extension. Push the extension down on the spring and screw it into the nut. You will get 7 shells in the tube if you did it right. If you are getting stuck at 5, you have the spring pinched start over again. Once you get the hang of it you will say boy that was easy."

OK, i am going to try the CDM BMT...i hope it will fit on a SUPERNOVA and it's factory extension...

THANK YOU GUYS FOR ALL THE SUGGESTIONS. i'm gonna look into all of them. anybody have any info on the CDM clamp?

thank you.

FUruCK OBAMA!

OK, will the NORDIC barrel clamp work well with a Factory Benelli +2 Extension? I ask because the factory extensions have an indentation meant for the factory barrel clamp...but it does not support a picatinny rail. how the **** do i mount my tac light? Also, there are also 2 different types of nordic clamps...both same price. One is meant for a mossberg with a thicker barrel. would the one meant for the mossberg be better in quality compared for the regular clamp?

i am able to cycle it with any jamming using the original shorter spring with the +2 extension. i haven't shot it after i installed the extension...but i assume if it doesn't jam without firing, it won't jam during firing right?

after i removed the stupid plug inside...i was able to load in 4+1 before i added the +2 extension.

it's out. the stock plug and spring retainer was removed.

it doesn't require any cutting? also, what's the length of that spring? maybe i can just cut my spring down? i'd rather stick with factory parts. thanks...i'll keep that in mind!

i figured that, but what spring should i use? the one that came with the FACTORY extension which only allows me a max of 6 shells or the original spring that allows me up to 8 shells but has crap spring tension? please see the video clip, maybe i'm just being paranoid about the whole spring tension thing...i just don't know if anything is supposed that loose on a firearm...: http://s796.beta.photobucket.com/user/PCFIVEZ/media/supernovaspringextension_zps10c09c45.mp4.html

ok, now using the original benelli spring (the one that came w/ the shotgun) i can now fit 7+1 shells (2.75") and 6+1 shells (3"). my only issue is that when it is empty, the spring wobbles around inside. WTF...i know damn well that's not supposed to be.