Search the Community
Showing results for tags 'benelli m4'.
-
Excellent shape, like new, no scratch or blem on its finish Asking for $250 or best offer, can do Zelle or Venmo
-
Hoping and praying the fine people in this forum can help me. I needed to remove the stock from my Benelli M4 since the stock bolt has become loose. However, the recoil spring cap (the metal piece that you screw in to the end of the recoil tube, and which caps and secures the recoil tube spring) has also unscrewed (and also the spring clip that is supposed to retain the recoil spring cap in the recoil tube) along with the stock bolt. So I now have a detached stock with a stock bolt that can’t be removed or unscrewed from the recoil spring cap and spring clip. I am so frustrated and don’t know what I can do. The recoil spring cap is located deep inside the receiver end of the stock, making it almost impossible to reach and immobilize so that I can unscrew the stock bolt from the butt end of the stock. I have been trying with several long tools that I thought might be able to hold the recoil spring cap steady but to no avail. Does anyone have a viable solution to this crazy problem? Maybe stranger danger can chime in?
-
Is this wear under the ejector on the m4 normal? I don't seem to have any major issues, the bolt rides smooth probably because it's worn in, I have about 1000 rounds on it. But I do have the occasional failure to eject on the last round, so I wonder in my bolt position is slightly out of spec.
-
Hi All: Rumaging around on the Internet for these manuals is kind of a pain, so I'm linking them to this forum from my Google Drive. These links should be good forever, unless Google goes under or the Internet disappears: USMC Technical Manual (TM 10698A-10/1): Operator's Manual for Shotgun, Combat, 12 Guage Semi-Automatic M1014 1005-01-472-3147 November 2000 18410698000: https://drive.google.com/open?id=0BxN5CusgXy6nbm1udXh5dzYyYUU Benelli M4 Product Manual M4 (comes with the shotgun): https://drive.google.com/open?id=0BxN5CusgXy6nNmlRcGxjWEpOaXM ENJOY!
- 22 replies
-
- 10
-
-
-
- benelli m4
- m1014 manual
- (and 3 more)
-
I have my M4 setup how I want it and I don't need these extra parts. I took the recoil pad off of my collapsible stock and replaced it with a LimbSaver recoil pad, so I don't need the original pad. I thought I would use this Briley Trigger Shoe, but I don't like it. Ideally, I would like to sell all of this at once and ship it out in just one box. Fingers crossed. Trigger Guard: $140 Pistol Grip Stock Black Synthetic: $130 5 Round Magazine Tube with 5 Round Spring: $105 Shell Stop/Bolt Release Button: $40 Shell Carrier: $35 Right and Left Forearms: $30 each Safety Button: $20 Sling Attachment Plate and Retainer: $15 Follower: $15 Shell Stop Pin: $5 Cartridge Latch Spring: $5 Collapsible Stock Recoil Pad: $25 Briley Trigger Shoe for Benelli and Franchi Black: $20
-
Hi all, I had a request to do a detailed pictorial on the disassembly of the Shell Stop. Removal of the Shell Stop is the same for the factory and GG&G model. In fact, the GG&G model is simply a modified factory Shell Stop. Start out by unloading the weapon and setting the ammuntion away from the work area. Field strip the M4, remove the barrel assembly, bolt carrier and trigger group. The stock may be left on. This is a view of the inside of the receiver. It shows the placement of the Shell Stop Spring. The spring is a loose fit, so you should note its position before disassembly.
-
Does anyone have an m4 collapsible stock for sale or recommend where I can get one? Thanks
-
I’ve been looking for this rail forever. In desperate need of it for work. Will pay shipping please show me what you have and how much you want
-
Hello all, I am ready to add some features to my stock M4 (11707), that will also comply with 922®. I use it for 3 gun every now and then, which allows up to 8 shells before the bell, so the 7+1 is valuable to me. In addition, I just feel that my M4 is not quite complete w/out the C-stock... These are the two routes that I am considering: OPTION 1 FFT full-length mag tube in s/s $159.99 FFT trigger package (hammer, trigger, disconnector) $149.99 Benelli C-stock $350 or so... This package includes the 4 922® compliance parts needed. TOTAL COST $660 or so OPTION 2 FFT full-length mag tube in s/s $159.99 FFT follower $24.99 ProMag C-stock(pic looks like a copy of the Benelli c-stock) $180 This package includes the 3 922® compliance parts needed. TOTAL COST $365 I know that the titanium tube weights about 150g less, but the s/s weights less than the stock tube and costs $80 less, so I'm okay with that. All I really want to add is the full-size mag tube and the C-stock the other items are just being added to fulfill the 922® laws. I would love to hear some feedback from those of you who have had experience with these parts or manufacturers. Which route should I go? Are these wise options or do you know of better ones? Thanks in advance for your input!
-
Hi everyone it’s a pleasure to be here, I just picked up my first Benelli a few days ago and I’m hooked! I’m a knife maker and Tattooer from Texas. Since I make things and love modifying my firearms, I decided it would be pretty awesome to make a Titanium Damascus bolt release button for my M4-H2O I’ve made two so far, but plan on doing a small batch! Here are a few pics on how it turned out. Let me know what y’all think, Thanks for looking!
- 7 replies
-
- 2
-
-
- benelli m4
- benelli h20
- (and 1 more)
-
Hello, Does any one know of a low -profile sight replacement for the ghost ring? I use my M4 for sporting clays from time to time ( I know, it’s not remotely made for this type of soothing) but it is fun challenge regardless. the rear ghost sight makes it nearly impossible to track the clays mainly because the ghost sight protective vertical wings. i was thinking of removing the rear sight altogether but a low profile replacement would be ideal any thoughts?
-
www.Benelliparts.net http://www.benelliparts.net/store/c1..._Products.html Benelli M4 Collapsible Stocks & 7 Round magazine tubes available Standard Black,H2O and Dark Earth Same Collapsible Stock on the Service Shotgun of the U.S. Marines. Factory New Original OEM Benelli M4Collapsible Stocks #70085 #70052 on Benelliparts.net,Gunbroker.com,eBay.com and Benelli Manufacturer Part #70085 #70052 For best price call direct (909) 659-1050 to order https://forums.benelliusa.com/showth...-GUNBROKER-com -
Hello and got my first shot gun (m4). Go big or go home. Still learning about the weapon (am a Former Marine, so shooting isn't new) but looking to breaking it in and just general cheap /decent ammo to shoot . I will maintain good home defense ammo and will train with it at some point in the near future. Trying to Google/you tube info from experienced shooters. Any advice on decent ammo to break this in and not kill the wallet to badly? thank you in advance.
-
I found myself in need of a magazine plug for my m4 with Kip's FL mag (hunting migratory birds, mag must be limited to 2 rounds). I searched the internet, and even ordered one of those Butler Creek plugs, but it seems nothing out there is long enough (12 inches). In the end, I made my own, and thought I'd share the process in case there are others who are interested. Parts: 1) Brass tube, 13/32" (10.32mm) OD with 3/8" (9.53mm) ID by 12in. 2) Tree nut, metric thread, 9.60mm OD with 22.2mm diameter cap. 3) Wood dowel (screw type), 3/8" OD. [ATTACH=CONFIG]911[/ATTACH] Process: 1) Polish tube with metal polish for aesthetics. [ATTACH=CONFIG]912[/ATTACH] 2) Insert tree nut and hammer flush (interference fit). [ATTACH=CONFIG]913[/ATTACH] 3) Insert dowel and hammer in to tube to desired length. [ATTACH=CONFIG]914[/ATTACH] Finished product: [ATTACH=CONFIG]915[/ATTACH] To fit plug, simply remove the magazine cap and insert through hole in mag spring retention clip and reinstall magazine cap. The OD of the tree-nut is about 0.8mm smaller than the ID of the magazine tube. The pressure of the magazine cap centers the plug and keeps it snug in the tube (rattle-free). No tools required for installation/ removal. See following thread for pics of installation (can't seem to post more than 5 pix per thread.)
-
Hello guys, I am actively looking to purchase a bolt carrier group in TiN ( titanium nitride), either made by Salient , Taran tactical or Tacord , for my Benelli M4... I know these guys are not selling bolt carrier group as a sole part, but if any of you have one and willing to sell, i am ready to make a good offer. I am also possibly looking for the ATI Raven package for the M4, all of it, if anyone, PM me. Please PM me Thanks -
Hello my friends! I want to buy this for my Benelli m4 s90! Please send an email 2205533 at Gmail com Thanks. Vadim
-
For Sale: Factory Benelli OEM M4 M1 M2 M3 Muzzle Brake / Compensator / Breacher comes with the Choke adaptor. Most ammunition can be fired thru the choke because it does not taper down. Rare part, If your Benelli has a removable choke then this will fit Very tacticool. i have a limited quantity available. $299 shipped all forms of payment accepted including PayPal. No extra fees. http://www.ebay.com http://www.gunbroker.com www.benelliparts.net [email protected] c (909) 659-1050 Anthony Benelli M4 Collapsible stocks $249 Benelli M4 7 Round Magazines $139 All New Factory OEM Spare parts.
-
I am putting together my first M4 and I am wondering if it's worth the 3 1/2 month wait for the CC tube? The factory one is out there as well as a few others. Please advise.
-
Factory OEM Benelli M4 Collapsible Stocks on GUNBROKER.com & Ebay Factory 7 round magazine tubes on and Amazon. Same Collapsible Stock on the Service Shotgun of the U.S. Marines. Factory New Original OEM Benelli M4 Collapsible Stocks on GUNBROKER.com, eBay.com and Amazon.com $399 On Gunbroker.com also available 7 round factory OEM magazines email @ [email protected] call direct (909) 659-1050 to order
-
***SOLD*** WTS SideArmor short rail with eight (8) round side saddle for the Benelli M4 platform. This is a Mod 2 design. It was mounted but never used. Includes rail with side saddle, Locktite, allen wrenches, screws and O rings. It is up on GB now however I will take it down if someone here is interested and no one has bid on item. $50 plus shipping.
-
[ATTACH=CONFIG]2380[/ATTACH][ATTACH=CONFIG]2381[/ATTACH] ALL NEW PARTS IN STOCK Benelli M4 Collapsible Stocks For Sale on http://www.gunbroker.com Just enter Benelli M4 in the search on Gunbroker.com and everything Benelli m4 will show up. Or Direct thru me collapsible stocks $499 Full 7 Round magazines $199 Call (909) 659-1050 to order Ships the same day 2-3 day Priority Mail.
-
Hello all, thought we would pop in and mention we just opened up Pre-Ordering for our ATI Raven Benelli M4 Stock and Forend on our website www.atigunstocks.com Check it out and let us know if you have any questions - Our Facebook page will continue to put out more info on the Raven leading up to SHOT.
-
Hello all, Promag Tactical Forend for Benelli M4 Promag item #PM253 ***MADE IN USA, AND COUNTS AS ONE 922R COMPLIANT ITEM*** The package came with a collapsible stock and this tactical forend, I only needed the collapsible stock... I opened the package, removed the stock and resealed the package, leaving the tactical forend brand new and uninstalled. It has a rail on the 3, 6, and 9 O' clock positions. See attached pics! email me at [email protected] if interested
-
there is no need for anymore discussion. Thank you all for the well wishes.
-
I have Factory Original Genuine Benelli M4 Full Length Magazine's In Stock $199 shipping included any Questions email: [email protected]. I have sold many and no complaints as of yet on gunbroker.com or Ebay the original spring is Good! use the factory spring you already own, Benelli does not shorten the spring, these are factory Benelli Original parts made of steel. 290grams, sealed and individually labeled. Package deals available. I also have Original Benelli m4 collapsible stocks email me for best price. GUNBROKER.COM http://www.gunbroker.com/Auction/ViewItem.aspx?Item=359140121
