-
Posts
580 -
Joined
-
Last visited
-
Days Won
10
Posts posted by Vertigofirearms
-
-
I can confirm M2 20 gauge is shell latch is the same 12 gauge shell latch.
-
Bumping this thread as I was informed by Stranger Danger that people have been trying to modify the shell latch.
I was working on converting a ethos shell latch to be backwards compatible with the older receivers until I came across a few threads about this. The one that sticks out to me is from bsp212 on the Briley loading port thread.
On 2/9/2020 at 5:04 PM, bsp212 said:Benelli will tell you the same regarding the 20g vs 12g shell latch for the M2. My guess is the only way to find out is to experiment. The spring and pin locations should be the same so it may be worth a try.
Coincidentally, I had ordered the the Rob Roberts modified 20 gauge shell latch before I saw this thread. So I will have 2 different 20 gauge shell latches to see.
Late into my research, I discovered Briley manufactures a two piece milled shell latch, but it requires enlarging the receiver hole.
-
-
9 hours ago, ClackClackBAM said:
Thanks! I just ordered the set of them along with a hammer, so I'm pretty excited for it to come in!
Earlier tonight I ended up using an allen key to finish off the pin. Accidently knocked it out, but I was able to get in back in easily enough.I remember doing that once?. Ordered a set of nice punches and never looked back.
- 1
-
It is still pretty amazing how many Benelli parts are still backwards compatible. I wished Benelli would have an online resource center to check parts fitment.
-
Hensoldt RSA-S. I have one on mine.
BTW that is Sigma05's Benelli.
-
http://www.shotgunworld.com/bbs/viewtopic.php?f=61&t=391968
Benelligunny is most likely correct. I dug up a deep archive of a post I replied to before and sure enough there is a picture of the two choke tubes. SL80 choke tube.
-
I like the clean look. I think I might go this route
- 1
-
Not easy to remove. Buy the best roll pin punch you can afford.
-
Oh you are correct. If you want it to be easily removable you will have to cut some metal.
You could also install the M1014 single position tube.
-
Pretty much you take the stock apart and drop a pin in. You can reassemble or modify the button to be easier to limit.
https://www.calguns.net/calgunforum/showthread.php?t=1507997
Another option:
-
If you go that route, you can buy an extra button in the event you mess up the hole.
-
-
If you got an extra, I would like it. Online appears to be metal still.
-
There is likely something just slightly misaligned causing the hang up. Make sure nothing is protruding out of the trigger assembly.
-
did you cock the hammer?
-
hold the bolt release button down, then push the trigger in.
-
Rotate it a bit, play around with it. Get to know your gun.
-
Your Super nova has the same spring for both trigger pins. The Ethos has two as well, but only one is used to keep the pin in place.
-
-
I love the M4 lifter as well. I believe it is in the Ethos and Raffaello, just chrome plated.
I am having several M4 lifters cut to fit in my M3.
-
Already like the XS sight more.
I dunno if I will ever use it because my rig is set up for a red dot and has a cheek riser.
-
I never knew they were that expensive!
-
Shell stop mods
in Benelli
Posted
M2 20 gauge is the second from top with Rob Robert's longer tab.