-
Posts
868 -
Joined
-
Last visited
-
Days Won
36
Posts posted by M2_shootr
-
-
How 'bout yet another safety warning?
-
No Sir,.......sell away!
-
If ya decide to change the FCG bits,.......get an extra "c clip" when you order parts.
those things have a nasty habit of jumpin of the bench. Be sure to have a good of snap ring plyers
-
That I do nor know......
-
You are correct in your line of thinking........ProMag pistol grip and Benelli C stock
Personally, I chose to change the internals. Installing the Geissele hammer and FFT trigger was a wonderful addition!
-
While I am coveting one of those myself, that obviously won't work with the Sidearmor shell holder.
3gunner, you want the lowest possible mount you can get if mounting directly to the Sidearmor or Benelli rail. RM33. Here's one mounted to a section of rail on one of my M1's. Mounted to the M4 rail I think it's still too high to use the irons.
I understand now. Personally, a lower mounted optic would be more useful to me than a mag carrier.
-
This is what you want, you just don't know it yet.
-
I can not justify spending an extra $100 to save 5 ounces. Shooting light weight shotguns sucks.
If ya really feel the need to shave off five ounces, i would suggest a bit of gym time.
-
When you reinstall..........use no thread locker. A strap wrench is all I used for my Benelli tube install.
It has not loosened, I placed a small, black witness mark on receiver/tube as a visual.
-
Patience is key....
heat it, turn it in, turn it out,......work it, do not force it.
-
Interesting.....
-
What does the real sight look like,.......that part number is for the old "dovetail" mount rear sights.
-
Have the part number?
-
While that may work,.....the T1 is a much better option.
-
When using NV one needs NV compatible sights.
That tends to be very helpful.........
-
Recently transitioned from a T1 to an RMR.......love it.
Larger optics like the Bushnell and EOTech greatly compromise cheek weld for me.
-
Sorry.........thought I had a spare, only have my factory one.
-
I may have one.......I'll check and get back with you
-
I like the essentially non-existent Carrier-comp version. I have one, would like another...ah, to dream.
Would not be hard to get this duplicated by a machine shop.
-
The standard piece on the M4 works just fine for me.
-
Bad link........
****Got it.........
-
Alright alright. I made a mistake...but now I am in need of your input about the condition of the factory recoil tube, before I spend the money on the factory c-stock and make the required 922r changes.
What are your thoughts, does the wear look normal, will a factory c-stock run well on that recoil tube?
without a doubt.........will run just fine
-
Well, that makes sense! Junk parts, junk results.
-
Meh.........do what ya want, makes no difference to me.
ask opinions, then argue over the answers,.....makes no sense.
Over the top tacticool?
in Benelli
Posted
Someone is "over compensating"