Scalarworks
-
Posts
140 -
Joined
-
Last visited
Posts posted by Scalarworks
-
-
Does not come with the factory screws. Contact Benelli, they just may send you a few
The new BOR110 DOES include screws for mounting to the receiver. The original BOR100 did not because it employed the factory screws.
-
You guys are still going to keep producing them right??? Or is this just a momentary shortage from your site?
I sent an email a few days ago about buying one... but I needed to know if it came with all the mounting hardware (screws) necessary since I am missing one of the factory picatinny screws.
We have 3 left in stock. Rainier Arms has a bunch as does Brownells. We're very busy expanding our AR15 Low Drag Mounts so we do plan on making more BORs but we don't have an ETA on them.
-
Hi everyone. We only have a couple of BOR/RMR's left in our online shop but a couple of our dealers still have some in stock. Please head over there if you want one.
Thanks for your support.
-
The M4 and the ScalarWorks rail with an RMR is awesome!
Thanks! Have you checked out the new BOR/RMR that is compatible with the M2?
-
this is a very nice looking rail. I'm definitely considering picking one of these up.
Thanks! Please post up some pics of your setup when you get yours.
-
Figured I'd share. NP3 finished Scalarworks rail and mounting hardware. Unit is going on a Benelli M4 H20.
Awesome! Please post up a pic of the finished shotgun if you can.
-
Why wouldn't it cowitness with the ghost rings on the supernova? I thought all the ghost ring sight in the benelli line were pretty much the same. I'm looking at this rail also for my supernova.
You're right. I confused the Supernova (bead sights) and Supernova Tactical (ghost rings).
-
not sure if this has been asked yet, but will this rmr mount fit on a supernova?
It very well should, though it obviously won't co-witness with the iron sights.
We don't have it listed in the specs under compatible firearms because we don't have a supernova to try it out on.
If by any chance it doesn't work, please send it back for a refund.
-
Our latest batch of reworked BOR/RMR's is on it's way to anodizing and laser engraving. We're hopeful they can turn it aroudn for us in time for our revised June 1st deadline. In the mean time check out these in-the-white samples.
These are compatible with most Benelli Tactical shotguns that are drilled and tapped such as the M4, M3, M2.
Sign up on our web shop to be notified the second they are in stock and ready for sale. https://scalarworks.com/shop/optic-mounts/bor-rmr/
-
Thanks, guess a new red-dot and mount go on the Christmas wish list.
Y'all plan on going to SHOT next year?
We're at SHOT every year but we won't be exhibiting until we have released a lot more products.
-
Any chance you make these for the E-O Tech MRDS?
We don't at the moment nor do we have any immediate plans for one. Unfortunately the Eotech MRDS has a relatively tall front lip which precludes co-witnessing with iron sights.
-
Quick update on the Scalarworks BOR: We expect to have them back in stock mid-May. They'll be available from our online shop and from a few stocking dealers we'll be announcing soon.
One more thing... This new version will be compatible with more Benelli shotguns than just the m4.
-
Nice setup. Thanks for posting pics.
-
Both are good but I second the dot. With a large one like the RM05 has you can quite easily slice your target with the top of the dot to get extra precision when you have a lot of time to think about your shot.
Either way, let us know which you chose and how it's working out for you.
-
Along those lines, I received my mount last week for a little experimentation on my M1/M2's. The contour of the mount is compatible with the receivers on those models as well. The only difference is the precious little material in the receiver for D&T'ing directly above the barrel extension for the mounting screws in the rail section of the mount. The non-tactical versions have that groove along the top of the receiver that really leaves that area very thin. There's plenty of material in the rear portion of the receiver behind the barrel extension. That's why I am considering, as mentioned in a previous post on this thread, separating the RMR mount from the rail section. For a 3-gun shotgun I don't need the rail. Just the RMR mount. It would be mounted near the rear of the receiver so there's plenty of metal there for support and the RMR-portion has two holes for installing it. I've just got to decide which gun I'm going to try this out on, since there's no going back after the drill has entered the receiver.
I've measured and the installation would put the RMR dot a good quarter inch lower than what I already have on the gun below, making for a much better view through the sight. Right now it's just a tad high.We'll see what happens.
We salute you!
Please let us know if there is any technical assistance we can provide you with.
-
We get a lot of questions regarding which Benelli shotguns the Scalarworks BOR/RMR is compatible with.
For the record, the Benelli M4 is the only one that it's truly and fully out-of-the-box compatible with.
However, there are others that it could possibly be compatible with if you did some work. For those interested in going to the extreme with their shotguns, or are simply curious, we've created a 1:1 scale PDF that you can print, cutout and play with.
You can download it under the documents tab on the BOR/RMR product page.
-
Check out the Scalarworks BOR/RMR review on The Firearm Blog:
-
Their tech support line is a waste of time. When you call and select the option, of course you receive voice mail. Upon leaving a message and call back number. forget it. It ain't going to happen.
How sad.
Hi SxS1943. I'm very sorry that you're having trouble getting through to us. I just checked our system and there are no unanswered voicemails, so maybe there was a technical glitch. Irrespective, please accept my apologies and consider giving us another try between the hours of 9AM and 6PM Eastern Standard Time.
Alternatively, you can reach us nearly 24/7 via email here: https://scalarworks.com/contact/
Or you can also PM us on this forum or through our social pages:
https://www.facebook.com/scalarworks
https://twitter.com/Scalarworks
-
The guys at Primer media are putting together a review of the BOR/RMR and they've released some of the great photos they've taken for the article. https://www.facebook.com/PrimerMultimedia
-
We're big fan of Esstac's Shotgun cards: http://www.skdtac.com/Esstac-Shotgun-Card-p/ess.106.htm
Put a piece of adhesive backed loop on the left of your receiver and you can swap the cards out with fresh ones as you go. The cards fit into M4 mag pouches really well so you can carry plenty of ammo on any M4 chest rig. Works great.
-
Great setup. Thanks for posting pics.
-
Will the Insight MRDS mount on this rail?
I'm afraid not. As far as we know only the Trijicon RMR is compatible with this specific model rail.
-
Great choice. Please post some pics when you get the whole thing together.
-
Got the Scalar Works mount/rail on. Fits wonderfully, the weight savings is enough that you can been the difference when comparing it with the Benelli rail in hand. RMR arrives on Monday........Christmas coming early for me.
Awesome. Glad you like it so far. Which model of Trijicon RMR did you order?
BENELLI OPTIC RAIL The decisive Trijicon RMR mount for the Benelli m4
in Benelli
Posted
Benelli receivers are tapped to the original Weaver standard which is #8-40, not metric.
We had this confirmed verbally by Benelli USA's technical support manager who is also one of their most senior people.
All of our BOR110's ship with a set of dedicated #8-40 screws for mounting to any factory tapped Benelli receiver.