MrFootball
Members-
Posts
11 -
Joined
-
Last visited
Everything posted by MrFootball
-
Agreed. But with the way it is now, you wouldn't drill the whole recessed area out. If you drill a hole just large enough to run each side of the stems through to connect in the middle notch (see pic above), the remaining material should be enough to provide a base for the cups on each side, then the bolt in the middle notch anchors the RX Arms QD cups in. Would love to see if @RxArms has / could try this with the 61171. If it worked it could solve several problems, providing QD cups on both left/right sides of the stock.
-
I wonder if the RX Arms M4 QD Sling Mount would work for the 61171 Collapsible Stock? It looks like you might be able to drill all the way through both sides of the recessed circle enough to plug each side in, then secure it (in the gap shown in photo below) using the provided bolt. Has anyone tried this? I know @RxArms posts here, have they tried this yet with the 61171 Stock? Can they confirm that it would work? Could be a great solution to this vexing problem. https://rxarms.com/products/benelli-m4-parts-and-accessories/benelli-m4-qd-sling-mount-collapsible-stock/
-
Here's a link to an official Benelli promo photo of an M4 using this telescoping stock (the 61171 stock comes with the M4 in Europe) with a QD cup: http://www.benellidefense.it/sites/default/files/gallery/M4-tactical-emo-3.jpg Looks like the official Benelli part for this QD Cup may be 80198 Benelli M4 OEM QD Swivel Cup https://freedomfightertactical.com/products/80198-benelli-m4-oem-qd-swivel-cup Link to check out the rest of the gallery http://www.benellidefense.it/gallery
-
SuperNova Tactical with a Mesa Tactical PG, can it be done?
MrFootball replied to AIRB0RNE6176's topic in Benelli
Were you able to do it? How did it turn out? -
QD mount for Benelli Supernova Collapsible Stock?
MrFootball replied to Michael Singer's topic in Benelli
Looks great @M2_shootr! I'm looking to do this with my Supernova collapsible stock. I've got the Magpul QD socket. For the Benelli stock, It looks like you have either drill it out or Dremel it? Any helpful tips? How did you do it? -
Are you using a nordic clamp QD attachment on the front?
-
Is the other hole on the bottom end of the Supernova collapsible stock configured to be setup for QD?
-
Benelliparts.net immature and unprofessional, legitimate?
MrFootball replied to ShadowGuy's topic in Benelli
I recently bought from BenelliParts and found it to be great service with fast shipping. Got exactly what I wanted and would recommend to anyone. Treat people how you would like to be treated and you generally avoid problems.