SuzukiGS750EZ

Militec-1

I've had the RX Arms charging handle in my M4 now for 2 years with zero failures. The FFT charging handle has sat in a box unused since then. The only thing I wish RX Arms did with the handle was to make it just like the OEM so you can use it for disassembly.

I got the bolt and broke the magazine tube down/cleaned it up in preparation of new parts. I think I may leave the thread locker off the new magazine so I can swap between a 5 and 7 depending on the stock (my state doesn’t allow 7rd it pistol grip). Just need parts now!

I’ve continued to have great luck with the RX Arms

Hey all. I was wondering what hardware you need to install the stock itself. Also, does anybody know what linbsaver pad fits these? Last, how about a sling mount (quick release style). I currently have a mesa tactical stock and would like all the functionality from it but obviously with the wood.

Nope Definitely M4. I bought direct from FFT. It fit, stayed in under reciprocation. The issue was when pulling the bolt back manually the detent divots at the end of the charging handle weren’t as good as the OEM combined with the diameter of the knob made it easy to spin the handle which made it eject. The RXarms as well as OEM have given zero issue. RXarms feels as strong of a detent as OEM but much more comfortable.

Currently have the mesa stock on my M4. Is the LOP of the field stock the same for the pistol grip? I'm thinking about switching over as my state law requires no pistol grip in order to have the 7rd tube.

I’ve had the FFT and was not happy with it. It would rotate due to size and fall out constantly. I bought the RX arms and it’s just as good as the OEM in terms of retention but easy to grab per the reason to get the large handle. i forget where I got my bolt release but the over sized ones are worth it!

Has anybody fit a limbsaver butt pad to the field stock with no modification? Looking at the airtech version.

I’d like to try a field stock but don’t know aftermarket options in the US and or where to get a stock one. I like thelimbsaver pad on my mesa tactical, do they offer one for a field stock that bolts on?

It looks like you’d take a pair of C clip pliers, remove the C clip (snap ring) with the holes in it and swap the mount 180°

Bump

Hey guys. I'd like to lighten the trigger a bit and smooth it out. I'm going to be hunting with it this year and also enjoy shooting it on the weekend. Have maybe 5-600 rounds through it thus far. I added a Briley trigger shoe to it to relieve the hotspot from the OEM trigger when I'm shooting for a long while. What i'd like to do is ditch the Briley trigger shoe, lighten up the trigger pull and be able to pull through the shot a bit more VS pulling to the wall and having to somewhat yank the shot. It's not in my shooting sequence to do so (i shoot a lot of pistol and rifle) which is causing SOME inconsistencies in my hits and needing more concentration. I am not a competition shooter so a super light trigger isn't what I'm after. Just smooth and a bit lighter. I do not want to send it off to briley. My turkey season is coming up wednesday to the end of may and i'm comfortable working on my own stuff. With that said... I've seen shootingsight sells JUST a hammer. Would buying just the hammer and the A&S trigger kit get me what I'm after? Would it be more worthwhile to just dump the money into the freedom fighter tactical kit and use the wolff springs or go with the kit and get the A&S springs or? Can i work with the OEM stuff? I found the trigger would create a hotspot in my finger after a good bit of shooting so I went with the Briley trigger shoe to give the trigger a bit more of a wide area. It was almost like pulling on a paint can wire handle. I'd like to do as little as possible to the gun (my goal is to make the gun mine while retaining as many stock parts as possible). I currently have the A&S housing, the RX Arms heatshield/RMR mount, the Mesa Urbino stock and some other small parts like charging handle, sights, etc. This was really the only other thing on my list.

Mine is the same way and I noticed it more last range trip. Mine was bought in 2023.

I have the heat shield on the way

Is the wolf spring listed on their website for all 12ga the same one for the M4? Also, shell tactical sells one and also sells the wolf spring. Are all the wolf springs sold at various vendors the same spring or made differently per vendor? Also, are there any followers that allow more room or are overall a better design than factory? Haven’t had any issues with spring or follower other than capacity depending on shell but heard changing one or both may help.

Hey guys. I ordered the half moon sight in hopes that it suites me better than the stock ghost. I have a blitzkrieg chevron front sight coming in as well. I currently have an RMR on a scalarworks mount. What I don’t like about the ghost ring is I have to dip my head down a bit (is the half moon taller?) and it also gives a ghost arch at the top of the sight which is somewhat distracting. I’m trying to hunt with the m4 so I wanted to use my irons for turkey shot and my RMR for slug. anybody use this combo and or one or the other? How do you like it over stock?

I ended up creating one in CAD and 3D printing it in PETG

I see 1469470 as a part number for a limiting plug for the m4 but can’t seem to find one anywhere. I’d like to install it when I want to go hunting. Any recommendations on where to find one?

The mesa stock is also screwed into the recoil tube. I used nord lock washers to keep it tight.

I had issues in the beginning as well but the latest breakdown I was able to slide it in fine. I had hammer back and also put the trigger housing as far forward as I could and brought it back. Worked fine. Also, I use nordlocks on my retaining bolt inside the stock. Doesn’t loosen. They work against one another but still remove easily.

I can’t wait for this to be released. My current setup I love, but it makes maintenance a headache. I have the Midwest industries m lok cover. The rx arms one looks much better! I run an RMR and a light with pressure switch so that’s all I’d need it for.

I went with the aluminum housing from A&S. Swapping parts is super simple. When assembling I originally installed the stock pin that retains I believe the trigger but ultimately took it back apart and installed the roll pin. Nothing was difficult. Simple hand tools and a bench. And the scallop they put in is nice as well.

Hey guys. I’ve seen some M4’s around here with a vertical foregrip and I’m curious as to why? I have an M Lok rail and wouldn’t mind trying one if there were reasons I hadn’t thought of. Thanks!