CEBEP

Yep

3.45kg in this configuration

This is the one I’ve ordered

My T Pro has removable choke.

What’s receiver extension? If it’s loading port then I’d appreciate a few close ups!

M4 T Pro has different folding stock similar or same to M3. Bugger controls and different forend. It heavier, made of aluminum and no Mlok compatible. Instead you get few small picatinny rails to make your shotgun even heavier.

Installed mine today with Odin Light Mini. Perfect fit and finish, no issues. Mount comes with screws for light mount and hex.

Here you go

Kudos to RxArms for tool less approach. I will never install anything on my M4 that will require tools to disassemble the gun.

Check burn proof gear rail wrap. Adds no extra weight to the shotgun and removed/installed in seconds. That’s what I have on my M4.

Did you have any issues with Briley Carbon Fiber tube beside the look? Did it make significant weight reduction compared to stock tube? Thinking of buying one for my M4 to save weight.

The washer was my addition:)

I’ve just received email confirmation from Benelli Italy tech support confirming that this plate may be removed if used with original M4 polymer forend but must be used if used with T Pro aluminum one.

I realize it’s an old topic but still, this could be useful for some. More weight could be reduced by using Toni System polymer forend handguard with mlok inserts which totals to 94 grams. Also Toni System polymer stock, which is 350gr against 721gr of pistol grip folding stock or 606gr field stock.

Thanks for suggestion. I looked at Trex mount you’ve mentioned but it’s kinda putting the light further away from the gun and light that I have is not Surefire. If I’ll use a ligh, ideally I want it or it’s mount to have a quick release so I can attach it whenever I need to and be mounted as close to the barrel as possible for better weight balancing. Since there is no substitute for IWC mount, maybe I can tey creating one, say a newer version. But I need an IWC mount still to take some measurements.

Very valuable advice, thank you. SBR are not allowed in country where I live and 1301 wasn’t available. Beside, I bought M4 because I wanted M4.

Just a quick review. Main idea is to decrease the weight. Stock aluminum T Pro handguard is 323gr, new TST is only 92gr giving 231gr of weight reduction. It’s made of polymer with aluminum Mlok inserts screwed in. Handguard is installed tight, zero rattle or play. Just what I would expect from Toni System. Elevated top end covers the barrel almost to the top. There is a texture on the surface, so there is no way your hand will slide on this thing in any condition. It looks very sturdy. It’s questionable how usable would Mlok slots be in the place they are as my hand covers them all. I assume front one could be usable with a forward extender for flashlight installation. All in all I’m very happy with it and can’t wait to give it a go at the range.

Oh, I see now. Factory forend is all aluminum and pistons could very well be hitting it as tolerances are tight. Very nice, so I can remove it using new forend. Thanks!

I have just received Toni System forend designed for M4 which I was planning to install on my M4 T Pro ro reduce it’s weight. But I noticed that I can’t install it as there is a part of the forend that interferes with this spring in the pictures. I noticed there is no such spring on M4 but it is on my M4 T Pro. If I remove it the forend installs flawlessly. My question is what this spring is for and is it ok to remove it, thinking if it would affect shotgun operation in any way?

Apparently there is a difference. I have just received Toni System forend designed for M4 which I was planning to install on my M4 T Pro ro reduce it’s weight. But I noticed that I can’t install it as there is a part of the forend that interferes with this spring in the pictures. I noticed there is no such spring on M4 but it is on my M4 T Pro. If I remove it the forend installs flawlessly. My question is what this spring is for and is it ok to remove it, thinking if it would affect shotgun operation in any way?

Thanks for comparison. Are hand guards totally interchangeable? Can you out new one on the old M4 and polymer M4 on a new one T Pro? Thanks

Thanks. And location is good? I assume it should be on the upper side of the stock on opposite side for correct usage? I don’t have much experience with shot guns.

Are you still happy with this setup?

Do you have model for M4 T Pro? The latest release pf M4. Thanks.