Petek54321 Posted December 5, 2009 Share Posted December 5, 2009 I have had my supernova for about 2 months and have fired about 150 rounds out of it. Out of the first 100 rounds i had two rounds that failed to fire and there was a light firing pin mark on the shell. Today I went out and shot 50 and probably had about 10 of these. I have read a thread from about a year ago and it seems like this is a pretty common problem with novas and supernovas and the following reasons as to why have been given. 1. Too much lube 2. Too little lube 3. Firing pin spring is too tight 4. Firing pin spring is too loose 5. There is a little play in the forend after the action is closed and locked. There was no conclusion given as to what to do to fix this problem. #3 seems like the most likely problem to me but I am by no means an expert. Please weigh-in with your thoughts. Quote Link to comment Share on other sites More sharing options...
slugmeister Posted December 5, 2009 Share Posted December 5, 2009 I haven't heard this happening, but I would think either 1, the load is old or crap, or 2, the spring isn't strong enough. You can replace this on your own, Im not shure of the cost but im sure its under $50. Try brand new shells first. Quote Link to comment Share on other sites More sharing options...
Matt D Posted December 6, 2009 Share Posted December 6, 2009 Is it only happening on one brand of shells or have you tried different brands? Quote Link to comment Share on other sites More sharing options...
Petek54321 Posted December 6, 2009 Author Share Posted December 6, 2009 I have had it happen on 3 different brands of ammo Quote Link to comment Share on other sites More sharing options...
Novaking Posted December 6, 2009 Share Posted December 6, 2009 I have had my supernova for about 2 months and have fired about 150 rounds out of it. Out of the first 100 rounds i had two rounds that failed to fire and there was a light firing pin mark on the shell. Today I went out and shot 50 and probably had about 10 of these. I have read a thread from about a year ago and it seems like this is a pretty common problem with novas and supernovas and the following reasons as to why have been given. 1. Too much lube 2. Too little lube 3. Firing pin spring is too tight 4. Firing pin spring is too loose 5. There is a little play in the forend after the action is closed and locked. There was no conclusion given as to what to do to fix this problem. #3 seems like the most likely problem to me but I am by no means an expert. Please weigh-in with yourthoughts. have you cleaned the gun? Have you removed the firing pin and looked at the pin and spring? Quote Link to comment Share on other sites More sharing options...
Petek54321 Posted December 7, 2009 Author Share Posted December 7, 2009 yep, the gun has been cleaned after every time i have shot it. The firing pin and spring look fine and the inside of the bolt does not appear to have any obstructions. Quote Link to comment Share on other sites More sharing options...
James Morris Posted December 29, 2012 Share Posted December 29, 2012 I've recently started having the same problems, I clean my gun after every hunt and lightly oil it before storage, I've tried three different brands of ammo. I have noticed that I don't get misfires with a shell when I don't have any in the mag.( tube). I have had the gun apart and can't find any reason for this problem? Quote Link to comment Share on other sites More sharing options...
Petek54321 Posted December 29, 2012 Author Share Posted December 29, 2012 I've recently started having the same problems, I clean my gun after every hunt and lightly oil it before storage, I've tried three different brands of ammo. I have noticed that I don't get misfires with a shell when I don't have any in the mag.( tube). I have had the gun apart and can't find any reason for this problem? I sent mine to benelli and they fixed whatever the problem was. It was covered under warranty so, of course, they don't tell you what they fixed. Haven't had any problems since. I suspected something was off with the firing pin or the firing pin spring but I can't be sure. Quote Link to comment Share on other sites More sharing options...
PCFIVEZ Posted December 29, 2012 Share Posted December 29, 2012 I sent mine to benelli and they fixed whatever the problem was. It was covered under warranty so, of course, they don't tell you what they fixed. Haven't had any problems since. I suspected something was off with the firing pin or the firing pin spring but I can't be sure. did you send the whole shotgun to benelli or did you just send in the firing pin? Quote Link to comment Share on other sites More sharing options...
Petek54321 Posted December 29, 2012 Author Share Posted December 29, 2012 did you send the whole shotgun to benelli or did you just send in the firing pin? I sent the whole gun in. I'm guessing that's what you have to do. Otherwise they couldn't test the repair Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.