Jump to content

Need help.... M4 PART NEEDED


AR-BALLISTIC
 Share

Recommended Posts

Anyone have a spare California approved MAGAZINE TUBE they are not using anymore. Maybe you upgraded your M4 with a full length tube and don't need the old tube anymore. Let me know as I am in need of one. I would like it to be in new condition if possible Thanks. Mike:)

 

NOTE: The TUBE I NEED IS the main stock magazine tube and is 13 3/4 inches long including the THREADS. The LIMITER SCREWS onto the main tube. I HAVE THE LIMITER STILL so I ONLY NEED THE TUBE. THANKS

Edited by AR-BALLISTIC
Link to comment
Share on other sites

Anyone have a spare California approved MAGAZINE TUBE they are not using anymore. Maybe you upgraded your M4 with a full length tube and don't need the old tube anymore. Let me know as I am in need of one. I would like it to be in new condition if possible Thanks. Mike:)

 

NOTE: The TUBE I NEED IS the main stock magazine tube and is 13 3/4 inches long including the THREADS. The LIMITER SCREWS onto the main tube. I HAVE THE LIMITER STILL so I ONLY NEED THE TUBE. THANKS

im not sure what you mean by CRAZIFORNIA LEGAL??? but i have an OEM mag tube that came off of a M4 and had the black dummy ext. screwed to it. so its actually threaded on both ends. i bought my first M1014 there in ca. in oct. 2004. and this was the tube that came on it. its yours if you want it.;) let me know, Skeeter- by the way, what happened to yours????

Link to comment
Share on other sites

LOL... Thanks Skeeter and you are right the tube portion has nothing to do with being Cali legal. But yes the tube is the portion I need as I have the dummy ext. already. PM sent. Mike;)

 

im not sure what you mean by CRAZIFORNIA LEGAL??? but i have an OEM mag tube that came off of a M4 and had the black dummy ext. screwed to it. so its actually threaded on both ends. i bought my first M1014 there in ca. in oct. 2004. and this was the tube that came on it. its yours if you want it.;) let me know, Skeeter- by the way, what happened to yours????
Link to comment
Share on other sites

What do I need to do to my M4 to be compliant enough yo have a full length tube? Thanks

 

Hey Mike,

 

If you have a fixed PG stock you can comply with 922r

 

By using

 

1 US made full length mag tube (like Carriercomp titanium)

2 US made mag follower (like Brownells)

3 US made forend (KZ or Surefire M80)

 

In a month or two Mesa is coming out with a fixed PG stock with a shorter LOP than the OEM stock. That stock could be used to replace #2 or #3 above. This would allow you to keep your stock Benelli forearm grips

 

Pics of the stock are in post #34 of this thread

 

http://www.mesatactical.com/forum/vi...php?id=722&p=2

 

 

There's all you need to know about 922r in this thread:

 

http://www.benelliusa.com/forum/show...light=atf+922r

 

 

Happy Reading!

 

OK one more gratuitous pic!

 

006.jpg

 

Later,

 

Hookster

progress.gif

Link to comment
Share on other sites

OUTSTANDING Hookster. Thank you for the info. :D

 

Hey Mike,

 

If you have a fixed PG stock you can comply with 922r

 

By using

 

1 US made full length mag tube (like Carriercomp titanium)

2 US made mag follower (like Brownells)

3 US made forend (KZ or Surefire M80)

 

In a month or two Mesa is coming out with a fixed PG stock with a shorter LOP than the OEM stock. That stock could be used to replace #2 or #3 above. This would allow you to keep your stock Benelli forearm grips

 

Pics of the stock are in post #34 of this thread

 

http://www.mesatactical.com/forum/vi...php?id=722&p=2

 

 

There's all you need to know about 922r in this thread:

 

http://www.benelliusa.com/forum/show...light=atf+922r

 

 

Happy Reading!

 

OK one more gratuitous pic!

 

 

Later,

 

Hookster

progress.gif

Link to comment
Share on other sites

I'm in CA too.

 

Been thinking about going up to a full mag tube. Strongly considering the FFT Ti tube. Bought the Ti charging handle, it is tight. Received it coast to coast in 3 days or so. But only inquired into the Ti tubes, and they have them in stock. Just don't know if I need the extra 2 capacity. When I train, I've never felt I was missing out.

 

Hookster, you gun is off the charts.

Edited by h.bowman
Link to comment
Share on other sites

I am near Magic Mountain. The Santa Clarita Valley area. Mike

 

Cool! I grew up in the Hollywood area and I remember when they built Magic Mountain in the early 70s. I used to go ride dirt bikes at a place called Indian Dunes which I think is long since gone. It was near you in Castaic. My aunt also has a place down your way in Frazier Park.

 

Here's a couple threads related to the US made forearm choices

 

Surefire:

 

http://www.benelliusa.com/forum/showthread.php?t=19942&highlight=surefire+m80+review

 

KZ (pics start on page #3)

 

http://www.benelliusa.com/forum/showthread.php?t=19590&highlight=surefire+m80+review

 

Later,

 

Hookster :)

Link to comment
Share on other sites

I'm in CA too.

 

Been thinking about going up to a full mag tube. Strongly considering the FFT Ti tube. Bought the Ti charging handle, it is tight. Received it coast to coast in 3 days or so. But only inquired into the Ti tubes, and they have them in stock. Just don't know if I need the extra 2 capacity. When I train, I've never felt I was missing out.

 

Hookster, you gun is off the charts.

 

I don't know if anyone here has bought an FFT titanium tube so I haven't heard any reviews but I, like many here, will vouch for the high quality of Kip's Carriercomp titanium tubes and Wolff springs.

 

Later,

 

Hookster :)

Link to comment
Share on other sites

Are Kip's tubes marked MADE IN THE USA for compliance purposes

 

I don't know if anyone here has bought an FFT titanium tube so I haven't heard any reviews but I, like many here, will vouch for the high quality of Kip's Carriercomp titanium tubes and Wolff springs.

 

Later,

 

Hookster :)

Link to comment
Share on other sites

Are Kip's tubes marked MADE IN THE USA for compliance purposes

 

Kips, FFT's, SoComGuy's, etc. I think they are all marked "Made in USA" or "USA." Because it is so important for 922r, it would be unwise for a manufacturer of this part to NOT mark it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...