squawberryman Posted October 5, 2010 Share Posted October 5, 2010 I got Kip's rail Saturday. More machined coolery. Upon removal of the five flathead screws that hold in the factory turd rail, I discovered the italians devised a conical, helically notched lock washer to be lost upon the removal of each screw. BE CAREFUL WHEN YOU REMOVE THE FIVE SCREWS. I normally perform items such as this on a thick carpet padding that protects from bouncing srews, pins, detent balls, etc. I didn't on this, pay attention. Quote Link to comment Share on other sites More sharing options...
Guest cleefurd Posted October 5, 2010 Share Posted October 5, 2010 I got Kip's rail Saturday. ...... BE CAREFUL WHEN YOU REMOVE THE FIVE SCREWS. Very good advice. Aggie Phil suggested an install note be furnished to point this out. Shame on me for not doing it sooner. The tiny lock washers are so small that they elude casual detection and NEED to be mentioned by any reputable vendor who sells items requiring they be removed. Let me know how many you lost and I'll replace them. Quote Link to comment Share on other sites More sharing options...
xamoel Posted October 5, 2010 Share Posted October 5, 2010 i didn't really notice them when i took the OEM screws off, are they attached to the screws somehow? do i need to replace them, if i get a new rail? what purpose do they serve? Quote Link to comment Share on other sites More sharing options...
AggiePhil Posted October 5, 2010 Share Posted October 5, 2010 i didn't really notice them when i took the OEM screws off, are they attached to the screws somehow? do i need to replace them, if i get a new rail? what purpose do they serve? Quote Link to comment Share on other sites More sharing options...
xamoel Posted October 5, 2010 Share Posted October 5, 2010 ah, thanks for the info! found them btw, didn't use them on my sidearmor rail, i guess they are not necessary with the sidearmor system? Quote Link to comment Share on other sites More sharing options...
Guest cleefurd Posted October 5, 2010 Share Posted October 5, 2010 ah, thanks for the info! found them btw, didn't use them on my sidearmor rail, i guess they are not necessary with the sidearmor system? Take both the OEM and SA rails, side by side introduce factory screws.... if they both protrude the same distance out the bottom side, then use the washers. If sidearmor supplies their own screw and makes no mention of the washers, then I would ask them to clarify. Tolerances could become an issue in either case so it is important to ask the specific rail manufacturer for their recommendations. The carriercomp rail is designed to use these washers due to their inherent quality, being tempered and fine-serrated, which makes them uniquely compatible with aluminum as a low torque screw retention/lock, without the fuss of loc-tite in the comparatively weak realm of aluminum threads. Hope this helps. Quote Link to comment Share on other sites More sharing options...
squawberryman Posted October 5, 2010 Author Share Posted October 5, 2010 The bench fairy was flying all over me. All five in place ready to hold my B...... wait, pics to come soon. Quote Link to comment Share on other sites More sharing options...
xamoel Posted October 6, 2010 Share Posted October 6, 2010 Thanks for your answer kip, SA indeed provides their own screws, du to the rail being thicker. But i'll ask them anyway. So do you think using loctite is no good on the rails? Quote Link to comment Share on other sites More sharing options...
Guest cleefurd Posted October 6, 2010 Share Posted October 6, 2010 Blue (med) loc-tite and aluminum receiver threads mix well. Quote Link to comment Share on other sites More sharing options...
Decodence Posted October 6, 2010 Share Posted October 6, 2010 The mailman just dropped off my rail. What material is this made from? Probably be a while before I can find the time to do the install. The wife didn't appreciate me penciling in "gun fun" to the honey-do list. Can't wait for the muzzle brake (when is this coming?) and the bolt handle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.