Sawyer Posted March 7, 2011 Share Posted March 7, 2011 (edited) the light load assembly ( part number 190G ) in the spare parts book in my sbe2 is broken. the nipple like pin at the end of it has broken off. you can tell were it has been hitting the stock retaining nut screw ( part # 050G ) the gun is not that old, bought in february of last year. had been shot maybe 2-300 times untill duck season this past year. it was shooting fine untill i bought some of those remington hypersonic shells. i probably shot 5 boxes of 3 1/2 #2 through it with no problem, then it started not ejecting the first shot. i noticed i couldnt even pull the bolt back to eject the shell myself. i personally think it was caused by the shells, this is the 2nd sbe2 ive owned and never had the first problem out of either one untill this occurrence, but im no expert. any opinions? last, is this something benelli would fix or am i going to have to order the parts from somewhere? if its not that expensive of a fix i would rather order the parts since turkey season is coming up. also, if i do have to order parts, does anyone know where i could order them? ive not been able to find them anywhere on the net. thanks Edited March 7, 2011 by Sawyer Quote Link to comment Share on other sites More sharing options...
Tango two Posted March 7, 2011 Share Posted March 7, 2011 Here's the SBE II link for Numrich. http://www.gunpartscorp.com/catalog/Products.aspx?catid=10327 Quote Link to comment Share on other sites More sharing options...
hattles Posted March 7, 2011 Share Posted March 7, 2011 I see no reason why Benelli would not cover the fix. I'd suggest that you call them and speak to customer service to get a repair authorization. I'm quite sure they would cover it. Quote Link to comment Share on other sites More sharing options...
tucker301 Posted March 7, 2011 Share Posted March 7, 2011 hattles is right. No doubt they'd cover it. Quote Link to comment Share on other sites More sharing options...
elmo_tree Posted April 20, 2011 Share Posted April 20, 2011 the light load assembly ( part number 190G ) in the spare parts book in my sbe2 is broken. the nipple like pin at the end of it has broken off. you can tell were it has been hitting the stock retaining nut screw ( part # 050G ) the gun is not that old, bought in february of last year. had been shot maybe 2-300 times untill duck season this past year. it was shooting fine untill i bought some of those remington hypersonic shells. i probably shot 5 boxes of 3 1/2 #2 through it with no problem, then it started not ejecting the first shot. i noticed i couldnt even pull the bolt back to eject the shell myself. i personally think it was caused by the shells, this is the 2nd sbe2 ive owned and never had the first problem out of either one untill this occurrence, but im no expert. any opinions? last, is this something benelli would fix or am i going to have to order the parts from somewhere? if its not that expensive of a fix i would rather order the parts since turkey season is coming up. also, if i do have to order parts, does anyone know where i could order them? ive not been able to find them anywhere on the net. thanks I've run into the same issue - did benelli send you the part? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.