Jump to content

SBE II Bolt Group Problem


Recommended Posts

I have a SBE II Apg Camo 26". I just bought it and this is my first time disassembling it. Ok so here is the problem, the bolt locking head will not come out when disassembling the bolt group. I remove the bolt group from receiver, and then remove the firing pin retaining pin, while holding the firing pin and firing pin spring. Then I remove the firing pin and firing pin spring. Then I take out the locking head pin. Then I try and remove the bolt locking head and it will not come out! In the directions it says it should come out after those steps. Maybe Im reading them wrong and missing a step or something. PLEASE HELP!

Link to comment
Share on other sites

Relax, you are doing fine. If you have already removed the firing pin retainer pin & the firing pin with spring, the locking head pin (cam pin) should be free to be removed. Turn the bolt upside down and cycle the chrome locking head in & out of the bolt a few times to loosen up the pin. The pin should drop out as do this.

Edited by leid
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...