rothie097 Posted May 2, 2011 Posted May 2, 2011 I have a SBE II Apg Camo 26". I just bought it and this is my first time disassembling it. Ok so here is the problem, the bolt locking head will not come out when disassembling the bolt group. I remove the bolt group from receiver, and then remove the firing pin retaining pin, while holding the firing pin and firing pin spring. Then I remove the firing pin and firing pin spring. Then I take out the locking head pin. Then I try and remove the bolt locking head and it will not come out! In the directions it says it should come out after those steps. Maybe Im reading them wrong and missing a step or something. PLEASE HELP! Quote
leid Posted May 2, 2011 Posted May 2, 2011 (edited) Relax, you are doing fine. If you have already removed the firing pin retainer pin & the firing pin with spring, the locking head pin (cam pin) should be free to be removed. Turn the bolt upside down and cycle the chrome locking head in & out of the bolt a few times to loosen up the pin. The pin should drop out as do this. Edited May 2, 2011 by leid Quote
tucker301 Posted May 2, 2011 Posted May 2, 2011 Follow instructions in this guide. http://www.farrarsodfarm.com/nelli/SBE_cleanup.pdf Quote
hattles Posted May 2, 2011 Posted May 2, 2011 Follow instructions in this guide. http://www.farrarsodfarm.com/nelli/SBE_cleanup.pdf That's what I like about the inertia system...simplicity and utterly reliable. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.