Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums
Sign in to follow this  
StrangerDanger

NP3+ project in progress

Recommended Posts

Finally got my parts back from the painter. My guy matched the NP3+ quite well on the light. I took the shotgun out today and tested it and got her sighted in with some slugs at 25 yards.

 

CqaNumQ.jpg

 

uuADOx7.jpg

Share this post


Link to post
Share on other sites

Can you use that stock on the mid setting, and still see the dot immediately in the RMR? I ask because it should sit higher than irons, while still very usable. I know you don't need it on mod setting, but if you're handling some, could you check? Curious if using this setup will allow me to use mid setting on the stock and be G2G. I know irons I hurt my face, but I *can* do it, it just isn't comfortable at all.

Share this post


Link to post
Share on other sites

It’s a little more comfortable than using the iron sights, but I don’t find it comfortable and slower to get a proper cheek weld/shouldering. It almost feels like I have to twist my head slightly to get behind it. I’m big enough at 6’2 that the full length position doesn’t bother me, so I’ve gone back to using it full time.

Share this post


Link to post
Share on other sites
It’s a little more comfortable than using the iron sights, but I don’t find it comfortable and slower to get a proper cheek weld/shouldering. It almost feels like I have to twist my head slightly to get behind it. I’m big enough at 6’2 that the full length position doesn’t bother me, so I’ve gone back to using it full time.

 

I'm at that 5'10.75" nowhereville, where you're not short, but you gotta lie on your Tinder profile because real men have heights that start with a "6", but XL clothing that fits your shoulders and chest hangs down too low, and apparently Benelli hates you, too.

Share this post


Link to post
Share on other sites

For a bunch of Italians, you'd think they would have had a shorter LOP! Just round up on Twitter. Your profession should add a good solid four inches anyway!

 

I wish the Mesa Tactical Urbino didn't have that retarded attachment system. I could never get used to the field stock on the M4. I hated the way it would hang slung. The pistol grip really helps control the roll of the shotgun when you're hands off. It has that standard full length of pull too anyway.

 

I'd say with the Sync rail on the M4, you'd have a better sight picture with the RMR than with the irons. To me it is a little tight and cramped on the stock, but perhaps someone with shorter arms would do better?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...