71_Bronco Posted June 25, 2019 Share Posted June 25, 2019 Just recently picked up an M3 used, HK marked with the 7-shot mag tube and rifle sights. The standard stock is long for my taste (I'm not a big guy), so I'm trying to figure out my options. Obviously one route is the Supernova Colapsible stock, but that's a rather pricey conversion. I've read you can get a pretty short LOP with a comfortech stock and a small / short recoil pad. Can I get a comfortech stock for my M3? Another option would be to find a used, wood M1 stock, cut it down and mount my own pad. However, I dont really have the tools / experience to do this kind of mod. Any help would be much appreciated. Quote Link to comment Share on other sites More sharing options...
truckcop Posted June 25, 2019 Share Posted June 25, 2019 While the comfortech stock with short recoil pad option would pretty much accomplish what you're going for, the comfortech stocks will not fit the older generation guns. There have been folks over the years do a modification of the original stock but that's even more complicated than the wood stock cut-down you already mentioned. Without some serious modifications, you're pretty much stuck with what you've got. Quote Link to comment Share on other sites More sharing options...
71_Bronco Posted June 25, 2019 Author Share Posted June 25, 2019 Thanks for the reply truckcop. I was hoping that since the supernova Colapsible stock fit the M3, that the supernova comfortech stock would work too. Wishful thinking I guess on my part. Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted June 26, 2019 Share Posted June 26, 2019 (edited) Its not terribly hard to modify/shorten LOP on your OEM stock. Plus you get a sense of accomplishment by doing it yourself. A Dremel tool is your best friend in doing mods like this. Here are a couple pics of my M3 before and after I chopped her down. Green tape and a exacto blade made a nice straight line to follow, after that I decided to just reuse the oem but pad so I had to Dremel a step/recess for it to fit. (picture was taken before final sanding was done) You could also use a limbsaver pad with an adapter plate as well. Here is a link to that M3 project if youre interested....it was a fun build. https://forums.benelliusa.com/topic/21328-some-m3-love/?tab=comments#comment-143712 Edited June 26, 2019 by Jolly Roger Quote Link to comment Share on other sites More sharing options...
71_Bronco Posted June 26, 2019 Author Share Posted June 26, 2019 Thanks Jolly Roger. I may end up going this route, though I'd buy a factory replacement stock to do it to in case I mess up. Also, I'd like to keep all the stock parts separate so I can put it back to the way I got it. I was also looking at the Urbino stock from Mesa Tactical, but I'd rather try to stick with the straight, field style stock than the pistol grip. Quote Link to comment Share on other sites More sharing options...
Jolly Roger Posted June 26, 2019 Share Posted June 26, 2019 Totally agree, Im a field stock guy myself.? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.