NoTycoon Posted July 25, 2019 Share Posted July 25, 2019 I've ordered one ($207 shipped). Will let you know how it goes. Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted July 30, 2019 Share Posted July 30, 2019 Lifter just arrived in today's mail. Great turn around time. Stay tuned... Quote Link to comment Share on other sites More sharing options...
Sigma05 Posted July 30, 2019 Author Share Posted July 30, 2019 1 hour ago, NoTycoon said: Lifter just arrived in today's mail. Great turn around time. Stay tuned... Pics!!!! Quote Link to comment Share on other sites More sharing options...
Tim.Ward Posted July 30, 2019 Share Posted July 30, 2019 Ran mine in an ipsc lv3 this weekend, saved my bacon a couple of times due to some poor shot placement Quote Link to comment Share on other sites More sharing options...
roncruiser Posted August 14, 2019 Share Posted August 14, 2019 (edited) On 7/30/2019 at 3:17 PM, Sigma05 said: Pics!!!! Yes! Pics! Edited August 14, 2019 by roncruiser Quote Link to comment Share on other sites More sharing options...
roncruiser Posted August 14, 2019 Share Posted August 14, 2019 On 7/30/2019 at 2:05 PM, NoTycoon said: Lifter just arrived in today's mail. Great turn around time. Stay tuned... Update? Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted August 16, 2019 Share Posted August 16, 2019 While this is a drop in product, some tuning is required. It works most of the time but I need it to work every time. I have been working with the owner of the company to get it dialed in. We are very close. Note, I have an M4 which has small differences from the M2 trigger group. The last issue is an 8th of an inch hang that is, occasionally, catching the shell rather than letting it pass. Josh Kenny is very helpful and very receptive to my issues. I just need to get back to my workbench and polish the butt end of the shell catch. Josh indicated that this has fixed the issue for many others with the same issue. Quote Link to comment Share on other sites More sharing options...
Birdog19 Posted August 29, 2019 Share Posted August 29, 2019 Would love an update from you guys on this! Quote Link to comment Share on other sites More sharing options...
Tim.Ward Posted August 29, 2019 Share Posted August 29, 2019 Just now, Birdog19 said: Would love an update from you guys on this! Shot 3 shotgun only comps (400ish rounds) with it in the m2. Still working, does well on an empty start Quote Link to comment Share on other sites More sharing options...
Birdog19 Posted September 14, 2019 Share Posted September 14, 2019 On 8/15/2019 at 9:25 PM, NoTycoon said: While this is a drop in product, some tuning is required. It works most of the time but I need it to work every time. I have been working with the owner of the company to get it dialed in. We are very close. Note, I have an M4 which has small differences from the M2 trigger group. The last issue is an 8th of an inch hang that is, occasionally, catching the shell rather than letting it pass. Josh Kenny is very helpful and very receptive to my issues. I just need to get back to my workbench and polish the butt end of the shell catch. Josh indicated that this has fixed the issue for many others with the same issue. Hey Tycoon! Have you returned from your work bench yet! ;-{) Am wondering if you got this installed and working correctly. Thanks. Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted September 16, 2019 Share Posted September 16, 2019 Josh is sending me a new lifter. I went a little over-board with my tuning. It was completely my fault but he is replacing it for free. 1 Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted September 21, 2019 Share Posted September 21, 2019 Update, the replacement part has arrived; however, I am waiting for a new trigger guard from A&S before rebuilding the gun. Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted September 28, 2019 Share Posted September 28, 2019 It works! After many attempts to tune the parts, I stumbled onto a solution by simply installing an A&S trigger guard. With the conversion to the A&S, the auto lifter functions flawlessly in my M4. I have to assume that the stock Benelli trigger guard was not true to spec. 1 Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted September 30, 2019 Share Posted September 30, 2019 Update: I shot a 3-gun match today and the upgrades worked perfectly. The auto lifter saved so much time when the shotgun ran dry (not having to deal with putting one in the chamber and closing prior to reloading the tube). Also, the A&S trigger guard guided the second round of a double stack reload right into alignment with the port. I strongly recommend both products. 1 Quote Link to comment Share on other sites More sharing options...
Sigma05 Posted October 1, 2019 Author Share Posted October 1, 2019 On 9/28/2019 at 1:49 PM, NoTycoon said: It works! After many attempts to tune the parts, I stumbled onto a solution by simply installing an A&S trigger guard. With the conversion to the A&S, the auto lifter functions flawlessly in my M4. I have to assume that the stock Benelli trigger guard was not true to spec. So with the A&S trigger guard you didn’t need to do any modding or fitting for the autolifter to work? Just plug and play? Quote Link to comment Share on other sites More sharing options...
Tim.Ward Posted October 1, 2019 Share Posted October 1, 2019 I ended up removing mine, wasn't reliable enough. Saw two of them this weekend at Central European Shotgun Championship crap the bed, the Russian team I was shooting with all removed their lifters after trialling them. Quote Link to comment Share on other sites More sharing options...
NoTycoon Posted October 1, 2019 Share Posted October 1, 2019 Yes, the auto load lifter worked, plug and play, with the installation of the A&S trigger guard. Note, however, that prior to purchasing the A&S trigger guard, I had already ground down the notch on the shell latch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.