Cbigldj25 Posted April 30, 2020 Share Posted April 30, 2020 I have a m4 in FDE thinking about getting the NP3 coating and a few upgrade where should I start any info would be awesome thanks Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted April 30, 2020 Share Posted April 30, 2020 I have done a few of these for clients. With Robar out of business, I sourced a new place that does NP3 finishing at Wright Armory in Mesa Arizona. They offer basic gunsmithing and disassembly services. They laser engrave all the parts and do an excellent job finishing the parts. Now I’m not sure how well their general gunsmith knows the Benelli M4. For mine and others I did the full tear downs to make sure as much of the parts were plated. I would recommend using Np3 vs. NP3+. Regular Np3 costs less and the surface hardness is harder. Cost is very high for the plating. With shipping we are seeing costs around 1100. Quote Link to comment Share on other sites More sharing options...
Cbigldj25 Posted April 30, 2020 Author Share Posted April 30, 2020 Thanks SD I really appreciate the info an you pm me your contact info if your still doing the tear down Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted April 30, 2020 Share Posted April 30, 2020 Sure thing. Quote Link to comment Share on other sites More sharing options...
DFWSFO Posted May 2, 2020 Share Posted May 2, 2020 Is there a way to get the benefits of NP3 while preserving a darker color? Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted May 2, 2020 Share Posted May 2, 2020 You could have it plated, then have the surface blasted and Cerakoted whatever color you want. It’ll just add to the cost. 1 Quote Link to comment Share on other sites More sharing options...
DFWSFO Posted May 2, 2020 Share Posted May 2, 2020 Thanks SD. I was reading up about ArmorLube as well. Seems like an interesting NP3 alternative. Quote Link to comment Share on other sites More sharing options...
StrangerDanger Posted May 2, 2020 Share Posted May 2, 2020 There are a bunch of good options out there. Sometimes they have tolerance stacking issues if it is applied thick. I did a M4 in nickel boron with WMD Guns back around 2013. I had a hell of a time fitting all those parts back together. Quote Link to comment Share on other sites More sharing options...
TorchRedTulsan Posted May 4, 2020 Share Posted May 4, 2020 It's going to break my heart if you color over that FDE. I was trying to find one for quite a while when I finally settled for my M1014. I'd be tempted to offer to buy yours so you could buy a plain jane one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.