Jump to content

Robert II

Members
  • Posts

    81
  • Joined

  • Last visited

    Never

Everything posted by Robert II

  1. They also make a "youth" stock which is shorter and the gun is therefore lighter. Best, Robert
  2. Optional item for the shotguns. They can be purchased from the Benelli's site store for $40.00 plus shipping(workes the same for all 20-12 ga.).I find that the necessary break down of tha shot gun to fit in the case is time consuming. Best, Robert
  3. Make sure that the shell is pushed down and forward on the carrier while the slide is released. My "older" SBE will take the 3 1/2" shells while my newer 20 ga. Montrefeltro will only take 2 3/4" shells (not the 3")when it's rear carrier "slot" was filled in with epoxy. Best, Robert [ 12-05-2004, 09:49 AM: Message edited by: Robert II ]
  4. The barell is very poorly coated. My SBE and Montrefeltro (20ga.) need to be coated(rust preventative) and cleaned with each use. Benelli should do a better job in this area. Any suggestions? Best, Robert
  5. Robert II

    Newbie

    Try for the Montrefeltro in a 24-26". I realy like the ease of operation/ cleaning, wood and light weight, 5.5 Lb. I purchased mine online at www.Gunbroker.com for $500.00 used, with case and chokes. Best, Robert [ 11-28-2004, 06:48 PM: Message edited by: Robert II ]
  6. Will only load a 2-3/4" shell on bolt carrier. 3" is too long. Best, Robert
  7. Yes, 2 & 4 shot mag. extensions for all Benellies, Best, Robert
  8. I have not been there, but I have heard that they are useful when the birds are hot and heavy. I am planning on one for my 20. The 4 shot extension is already on the SBE and I love it!!. Great for all non hunting restricted events (Crows and Jays disagree). Best, Robert
  9. Drundel, Don't forget the 4 shot Mag extension will add weight too. Best, Robert
  10. Montrefeltro is slightly lighter and it holds 4 rounds in longer forearm rather than 3 . I went with the Montrofeltro, wood rather than plastic. Best, Robert [ 10-31-2004, 01:58 PM: Message edited by: Robert II ]
  11. It is the rear cross grove on the bottom of the bolt. There are only two, the rear one os about 3/8" simi-circle across rear about 1"from end. May be others can post picture. Now for the 4 shot extension. One in the chamber, one on the boltcarrier, and eight? up the tube?= 10. Best, Robert
  12. Yes, I just filled in the rear slot in the bolt and works just like my Benelli SBE!(which is missing this slot) Just added another round 5+1=6 Total. Best, Robert [ 10-29-2004, 05:38 PM: Message edited by: Robert II ]
  13. Will this work with 20 ga. M-1 and montrefeltros? Best, Robert
  14. Any one have experence on a 24" Barrel? Best, Robert
  15. Hevi-shot is superior to all others in my opinion. Unlike steel, chose one or two sizes smaller than what you would with lead. Best, Robert
  16. The law is for Autos. Pump actions are not covered. Best, Robert [ 10-12-2004, 10:51 AM: Message edited by: Robert II ]
  17. Go to www.HKpro.com and www.HKweaponsystems.com and use the "search" engine on the "Discussion boards". You will find that it is an early model, sold in the US by Heckler and Koch. Best, Robert
  18. It comes with the factory mag extension. Best, Robert
  19. You have the best in the industry. I have not forud better than the SBE. Robert
  20. Try your post on www.gunbroker.com/forum You will reach a much broader base. Best, Robert
  21. Robert II

    heavy shot

    Any information on using #4 Hevishot with Activ 2-3/4" hulls AND "Longshot" powder? 3-1/2" Federal steel hulls. Components? Thank you for any help/experence you can provide me. Sincerely, Robert
  22. Cheaper than Dirt has only two items. one is for the Winchester 1300 and the other is for a over the end of the stock. Which one did you purchnase that replaces the original? Best, Robert Found them: Cat. Item #39379 Mfg. Item:10401 $21.78 Plus shipping [ 07-21-2004, 02:39 PM: Message edited by: Robert II ]
  23. No, too bad as it would have make for some nice options. Best, Robert
  24. Recomendations from experience needed for machine(s) to reload for my SBE and Montrefeltro 20 ga. Low to moderatly priced and who sells them. Would also like to do some rifle/pistol (.308 win./9mm,.40SW) reloading if practical/possible. Power/primmer/wads advice also needed. Best, Robert
×
×
  • Create New...